drive shaft length

[Ruptured Duck]

Do any of you guys know how long a rear driveshaft is for a 360/TF727/NP208 equipped fsj? I am planning an NP208 swap for my Jeep. The T-case came out of 258/TF727 setup and I know that the rear driveshaft on the six cylinder model is shorter, so I may have to make a new driveshaft or hunt for the right one. Thanks, any info would be greatly appreciated!

[Crazy_Jeepman]

A rear driveshaft from a Chero or Grand Wag with V8/auto and the 208 will be a direct swap. Also the Chero and Wag's 79 and down V8/TH400 Quadra Trac rear driveshafts are the correct length. If you can not locate one I would have one. ;)

[Ruptured Duck]

Thanks crazy jeepman! I have about 4 parts rigs with the QT. My old 77 wag would probably be the donor. Thanks for the offer though!

[Crazy_Jeepman]

Yup the 77 will do it.