What should I expect to pay?

[jode]

What should I expect to pay for two custom made u-bolts from 6 states for the front differential-side axle/spring?

They are making them for me right now and didn't give me a quote before hand. I just want to know in advance what I should expect to pay so I will know if they are trying to bend me over...They are only making two of them.

TIA

[Crazy_Jeepman]

Last set I had made were 9.50 each.

[Berrett]

around here they are about $4-$9 depending on size/length

[Slim]

we pay like $12.00 cdn each ,,,,wholesale

[Robber80]

i payed like 4 bucks each for mine at a local spring shop, but they help my out all the time.

[scotty]

i typically pay around $10-$12 apiece for 9/16 u bolts.

id prolly be alittle upset if they try and charge you more than $15 apeice...

[Poley]

well since you did not get a qoute first then $475.85 sounds about right.......... smile.gif LOL

[jode]

LOL - ended up being $19 for the two - thanks all :cool:

[KYJ10]

Im with Po, they should be right under $500. Prolly too late, but 5/8" U-bolts looks kool!

[BillyBob535]

I had 10" long 9/16" ubolts bent to 3.25" wide for my Dana 60 rear for $9 each yesterday at Fleetpride. I only needed 8" ones for my 2" blocks but I got them extra long just in case. I am going to cut off the excess.

The ones Rough Cuntry sent me were the wrong length (11" instead of 8"), wrong diameter (5/8" instead of 9/16"), and were for the wrong axle (3.125" instead of 3.25").

That $9 included nuts and washers too.

Bob

Oops - I see you got them already.

[ April 07, 2004, 01:14 PM: Message edited by: BillyBob535 ]