radio size 1 "dinn" ?

[djmac]

i am looking for a replacement radio for my 82 j-10. i often seem them listed as 1 dinn. will that fit in the dash of a j-10?

[Frankenstien]

Dont know about the J-10 but it is taking some serious trimming to get a standard Din cassete head unit in my Waggy. Will probably end up notching the glove box.

J

[710 Burner]

A 1 DIN will fit just about anyplace a standard sized radio will fit, assuming it is not too deep.(front to back)

[AMC258]

If you want a direct fit, Kenwood still makes a post style deck, check www.crutchfield.com (http://www.crutchfield.com)

[rjw]

i bought one at radio shack fit wright in didnt have to trim nothing just took the measurments of opeaning with me and they found me one that was a direct fit

[tomd]

A DIN one will not fit in the space of a shaft style one without major trimmage...

[jimmy hat]

i installed a sony cd/mp3 (din mount) player in my 79 cherokee. the trimming was pretty minor. i just laid up the insert, eye-balled it to center, marked it with a thin tip sharpie, and cut it with a dremel. i slid the radio in 20 minutes after i started...just take your time.