Harmonic Balancer repair sleeve

[Terry B.]

Do they make them for the 360 and where can I find one?

Thanks,
Terry

[Crazy_Jeepman]

Most all parts stores have them. Napa has them. Take balancer with you they can also measure it and get you the correct one by that. I used to have the measurement, but I lost it!! :( Speedi Sleeve is what you are after. ;)

[fredws]

Got mine at O'Reilly's, it was for a 304, but would think that the 360 would use the same one.

[mdill]

Look for a timing chain cover gasket kit, they come in two flavors one
with the sleeve and one without, couple of bucks more for the one with
the sleeve. (FelPro is the brand that comes to mind)

Mike D.

[J4GRAND]

I picked one up for my 360 at the local auto parts store. About $4 if I recall.

[mechanic58]

YAY, good idea. Mine leaks like a BEOTCH!

[Terry B.]

Thanks for all the help. I found one at the local parts store.
Terry

[Al Johnson]

Now when you go to install it is when you get to be really careful. I installed one with a wood block and a hammer, and it didn't go so well. It ended up with a bulge just about where the seal would sit. So I peeled it off and got another one, and used an arbor press this time to make sure it stayed straight and went on perfectly even. That time it worked.

[Michael]

I would put blue locktight as the adhesive too. It will never come off that way.