Now, what degree shims should I get?

[KYJ10]

So Im to the point where Im close to bolting this 60 up. flipped the springs eye to eye, and am using the offset pads. Figure Im somewhere like 2.5" forward. Im using stock springs, so what degree shims should I use to correct my angle? Thanks, Dennis

[Stuka]

Whats your angle current at? I am guessing its pretty far down. It may requires moving the spring pads. As going to big shims up front isnt a good idea.

[orangecherokee]

when i did my SOA i set my angle at 23 degress. i know what you're thinking, but trust me on this it works great. i had the skyjacker 4" springs and those things have mega arch! anyway, rockjeep and i were doing another SOA this past weekend and set the front axle at 10 degrees. we moved the axle forward 1", plus the kids springs were flatter than a board and so we estimated for new 2.5" springs. it turned out great if you ask me. get an angle finder and check yours first and then go from there.