whats it worth

[fully standard jeep]

Hi i am from Australia and own a 1967 FSJ j3000 gladiator thriftside one of only 524 FSJ built in Australia by the willy corporation pty ltd. it runs a 232 motor, T98 gearbox with a DANA 20 transfer case. the diffs are 44 frount end and 53 rear end with 4.88 diff ratio.
Iv been told its a (matching numbers) car.
(1)So what dose that mean all parts and panles match, or just drive line numbers match ?
(2)Is it worth keeping it stock ?
(3)Are there eny problems with the 67 production that should be ripped out or replaced ?

[madmule]

Sounds like a nice rig. Post up some pictures. The matching numbers are for the drive line i.e. engine and trans that's a real plus in some circles. As for what to do with it, do what you like, it's yours. Stock would be cool, but they look so great modified too. You could always modify it, and keep the original parts and go back to stock later, or if you sold it enclude the old parts as part of the deal. Could be a selling point.

P.S. Welcome to the madness!

[Allen78J20]

Hello! and welcome! There are a few members here from Australia as well. I dont know what you should do. Since it is kind of rare there is australia, Id keep it original. Do you have any pics?

[fully standard jeep]

hear are some photos of my jeep j3000 gladiator thriftside its not much but its runs, iv driver over 9000 miles with it in one go witch isn't alot but still good it having the motor rebilt atm
well hope the photos came out.


http://s988.photobucket.com/albums/af4/automick/