Another Raybuck flare question

[dave jensen]

i finnaly got the raybuck catalogue, i see th elistings for the rear fender flares as fiberglass and universal. Has anyone used these and how hard and what is the procedure for installing them.
thanks
dave

[Tad]

Try This.

Raybuck Flare Post (http://www.ifsja.org/cgi-bin/ubbcgi/ultimatebb.cgi?ubb=get_topic&f=2&t=007060)

[Agent Orange]

I installed the flares following the tech article and I was left with a pretty large gap between the sheet metal and the flare. Fortunately I was durabacking and I didn't need a pretty seem between the two. If I was going for a nice paint job I would have been screwed. Reccomendation: if you are really good at body work and take your time it will probably be okay, but if you are like me and not very good at body work then have a professional do it.

[nightflyers]

I agree with Agent Orange-jce. They are not the best fit. Also due the fact that they are not a direct factory replacement, there is some fabricating to do in the wheel wells. If I would have known before hand what a PITA it was to install these, I would have tried to fix what was there or had someone else do it.