View Full Version : fired up Buick 350!!!
3jeeps
11-23-2001, 03:43 PM
Is there supposed to be a heat shield on the right side of the exhaust manifold on the 350? I am tired of melting my oil pressure line and catching my electrical on fire. :(
Crazy_Jeepman
11-23-2001, 03:53 PM
Yes there is one well actualy it is not a heat shield it is a heat riser housing. this housing gets hot as well and I would not think it will prevent meltdown. My thoughts on this is it will not mater if the heat riser is on there or not, it is the fact the line is to close to the manifold and must be moved. If you want the housing here is one for sale on eBay
350 Heat Riser (http://cgi.ebay.aol.com/ebaymotors/aw-cgi/eBayISAPI.dll?ViewItem&item=598133636)
;)
[ November 23, 2001: Message edited by: Crazy_Jeepman ]
miked
11-24-2001, 08:58 AM
yes there is a heat shield, it is different than the riser and does fit onto and over the pass side manifold. try J&W Jeep in Antelope Valley, CA (near sacto) for the part if you are missing one
md
vBulletin v3.5.4, Copyright ©2000-2012, Jelsoft Enterprises Ltd.