Front License Plate

[95pontiac]

I recently moved from NC to Virginia and now I need to put a license plate on the front of my '88 Grand Wagoneer. The front bumper does not have any holes in it for bolts. I don't want to drill through the bumper - any suggestions?

Thanks,

Craig

[CowKiller]

zip ties to the grill. duct tale to the hood.

[Crazy_Jeepman]

I think there are holes on the bottom of the bumper. A bracket bolts through that. I will check and see if thats what was done and see if I have the Plate bracket.

[joe]

As Pete said, there are two holes in the bumper(underneath) that the bracket bolts too.

[Iron Horse]

Sounds like a good excuse for an aftermarket bumper to me............. :D

"That's my story and I'm stick'in to it!"

[ March 21, 2003, 08:08 AM: Message edited by: Iron Horse ]

[95pontiac]

Where's a good place to pick up a bracket?

Craig

[AM Woody]

Probably a boneyard. My GW had a homemade bracket on it, and I found a factory one on my parts rig...

Andy

[BlueduckFSJ]

ziiiiiip ties!