Jake_S
01-21-2001, 02:01 PM
I have a question for you guys with the Performer intake; on the back of the stock intake there is a vacuum port for the carb, it's about 3/8 and tapped, and on the performer, there's a whole close to the same spot, but it's about a 1/2 inch in diameter and isn't tapped.
From what I can tell, I need that vacuum for the carb to work properly. Is the manifold I got milled incorrectly, or do none of the performer intakes have that vacuum port.
Jake_S
From what I can tell, I need that vacuum for the carb to work properly. Is the manifold I got milled incorrectly, or do none of the performer intakes have that vacuum port.
Jake_S