PDA

View Full Version : Loose steel hose...


Kimbrough
11-13-2001, 12:54 AM
While removing the carburetor I found a small steel hose in the manifold that is loose. In fact, it came right out! The steel hose is connected to the back and top of the carb by a short rubber hose. It is located on the pass-side of the manifold. There are 2 small steel hoses close together.
What is it,what does it do,should I be worried???

P.S. '88 GW - 2150 carb.

Crazy_Jeepman
11-13-2001, 01:04 AM
Those just put heat to your choke they just slide into the manifold. If your choke worked put them back in it will be ok. ;)