PDA

View Full Version : Tire Fitment Question


Snakeyes_Tx
07-17-2002, 05:36 PM
I'm getting a good deal on a new set of 33x12.50's so I'd like to go with those. I've got an overload leaf in the rear pack so my rear end is about 2 inches taller than stock height. I intend to put a few extra leaves in the front to level out the ride height as well.

Question is, can I clear the tires with just this and the 3" bodylift? This is mainly just a streeted rig, since I have turned my attention to a new monster for wheeling.

CarterKraftCustoms
07-17-2002, 05:40 PM
i have a 83 with rustys 4 inch lift and 33 i dont rub until i articulate it but on the street i have few problems

Spinner
07-17-2002, 05:55 PM
If you're planning on doing stuff like in your picture with the rear wheel stuffed, then you'll probably hit the front of the rear wheel well. If not you should be fine. That rear wheel well can waste a tire quick though so try and figure out before hand if the tires more valuable or the sheet metal is and adjust accordingly. Or better yet, lift your rig like Riverbeast(tm) and never worry about getting your tire close to the wheel well again! :D

Tad
07-17-2002, 11:31 PM
Here's some data put together by River Beast that pretty much says it all.

What Fits and What Hits (http://www.ifsja.org/ubb/ultimatebb.php?ubb=get_topic;f=9;t=000023)