Factory Radio wiring

[johnypreflt]

Ok heres what I have. a stock am/fm/cassette from an 81 Waggy. my question is does anyone know what color wire goes where or have a wiring diagram for the radio? the following wire combinations come out of th radio: 1)red wire & blue wire that share a connector. 2)orange wire, black wire, brown wire with 5amp inline fuse that share a connector. 3)white wire by itself.(power antenna maybe?). 4) green wire with white stripe, white wire with black stripe, solid black wire that share a connector. 5) solid green wire, solid white wire, black wire with white stripe that share a connector.
Any and all help appreciated. Just dont want to fry the unit by putting power to wrong wire!! :confused:

[graham]

johnypreflt
The following is from the Haynes manual wiring diagram, '72 thru '91 Wags and Pick ups. It's titled "Typical Audio System" :confused:

VIO/WHT connects to VIO/ORG from the Radio fuse, 15A in the fuse block.

Next two are for Electronic Tuning Only;
BLU connects to DK BLU from light switch.
PNK connects to RED/TAN from ETR Fuse, 10A in Fuse Block.

GRY to GRY for Power Antenna.

ORG/WHT connects to ORG/WHT from instrument panel Intensity.

WHT connects to WHt for RF Speaker.
BLK connects to BLK and connect to both right side speakers.
WHT/BLK connects to WHT/BLK for RR speaker.

GRN/WHT connects to GRN/WHT for LR speaker.
BLK/WHT connects to both left side speakers.
GRN connects to GRN for LF speaker.

BLK connects to BLK which is Earthed.

Hope this helps smile.gif

[andy d]

this would have been a big help coupla hrs ago. i'm on the install phase of putting a pioneer cassette deck harvested from a former jag. because the original is a POS. i peaked at the speakers as the pinout diagram on the radio is dyslexic. thanks Graham