body lift???

[bgwagoneer]

Does anyone make a 3" body lift kit for a 1972 Wagoneer or know of another kit that has at least 14 lift blocks. I can't find one. Any help is appreciated.

------------------

[Scott]

Call Tyres International, they have a sellout on Dick Cepek body lifts. I bought one for my wagon a few weeks ago. It went for about $45, and there were 14 blocks in it.

------------------
http://wsphotofews.excite.com/009/QG/Ab/p1/4K88936.jpg
88 Grand Wagoneer
401
MSD Ignition
4" Superlift Kit
3" Body Lift
33" BFG MTs
Eagle AE-063 wheels

www.real4x4.rockcrawler.com (http://www.real4x4.rockcrawler.com)

[GaWd]

Wow, wish I knew about Tyres int'l 2 weeks ago when I bought my lift(+4 blocks) from 4wheel parts.

Darnit...

Sam

[Veepster]

number for tyres??

------------------
Peace.............BartG

the Green Flash!
360ci
Custom 4v TBI
Edelbrock Performer Manifold
TH400, QT with low
4" skyjacker Rancho 9000's
33x12.50 BFG KO's 8" American Racing Baja Rims
Thorley headers, 3" exhaust, Dyno Max
Infiniti power leather seats
Custom billet shift knob by Millerluck
50%Luxury Car, 50%Tractor
http://www.teamgodspeed.com

[80wag.Darryl]

Hey I got a body lift for mine.I havent installed it yet,but I only got 10 blocks with it ?

[GaWd]

You have 10 pucks because you have a late-model Wag. The late model trucks had only 10 pucks.

My 66 has 14 pucks.

Sam

[Slippery]

<BLOCKQUOTE>quote:</font><HR>Originally posted by Veepster:
number for tyres??<HR></BLOCKQUOTE>

1-800-321-7123
Fax (330) 374-0038
www.tyres1.com (http://www.tyres1.com)

------------------
Jason K. http://cwm.ragesofsanity.com/s/net4/icon16.gif
"The only vehicle I have that I can haul an engine in, doesn't have an engine in it."

[This message has been edited by Slippery (edited April 10, 2001).]

[WINGO]

Check out the following link: http://www.4wheelparts.com/product2.asp?imseqn=303&occlass=P%2FA&c at=BOD&id=CXWFVPR9P3SR2GTF00AKHLV8EKBQFDS2

For my '84 GW, I ordered Performance Accessories Kit # 903. This includes 10 blocks and all the hardware. You will actually need 12 blocks to do the job. The two additional blocks will not need hardware and will mount below two body mounts that are attached to the body and rest on the frame under the rear cargo area. The Performance Accessories part # for these blocks is 3E03 and cost $ 5.99 each.

So the whole kit will cost :

Kit 903 $ 69.95
2 additional blocks (part # E303) $ 11.98

Good Luck!



------------------
WINGO
Vineland, NJ
USA
http://albums.photopoint.com/j/Thumbnail?u=1330817&a=11068485&p=38536654&Width=100&Height=100&Sequence=0
1984 GW 360
Rough Country/Heckethorn 2 1/4" AAL (actual lift)
Rough Country/Heckethorn Nitro 9000 Shocks
Performance Accesories 3 " Body Lift
31" X 10.5" Kelly MT

Soon to Have:
1- Rhino Grill
2- Alis-Chalmers Orange & Black Durabark exterior paint.

[Veepster]

woo hoo!!!!

just ordered my body lift from Tyres....2" for 29.95 the 3" was 40.95

the have one 2" left and one 3" left if anyone wants one of them....

so delivered to Cai it was less than $40!!!

------------------
Peace.............BartG

the Green Flash!
360ci
Custom 4v TBI
Edelbrock Performer Manifold
TH400, QT with low
4" skyjacker Rancho 9000's
33x12.50 BFG KO's 8" American Racing Baja Rims
Thorley headers, 3" exhaust, Dyno Max
Infiniti power leather seats
Custom billet shift knob by Millerluck
50%Luxury Car, 50%Tractor
http://www.teamgodspeed.com

[Veepster]

ooh one more thing......I have 33's and a 4" suspension....and I rub fenders pretty bad.....will a 2" body lift solve this problem?.......I would prefer not to go with a 3"

------------------
Peace.............BartG

the Green Flash!
360ci
Custom 4v TBI
Edelbrock Performer Manifold
TH400, QT with low
4" skyjacker Rancho 9000's
33x12.50 BFG KO's 8" American Racing Baja Rims
Thorley headers, 3" exhaust, Dyno Max
Infiniti power leather seats
Custom billet shift knob by Millerluck
50%Luxury Car, 50%Tractor
http://www.teamgodspeed.com

[Snakeyes_Tx]

Darnit,... who makes a bodylift for 86-up FSJ's! I need one to work with my little black flag x-case shifter! No one has mentinoed anything about it! That and does it come with all the linkages necessary? I figure only tranny linkage, x-case linkage... what am I leaving out that'll be an issue??



------------------
Snakeyes_Tx
86 J-20 "The Rusty Dinosaur"
360/727/208/44HD/60 &lt;- 2nd of all of them.
"If you don't know what the numbers mean, you don't need to be here!"

[irbob]

Veepster........I would go with the 3". Prepair for the future, you may want to go to a larger tire some time. http://www.ifsja.org/ubb/biggrin.gif

Snakeyes_Tx..........the 3" kit does not require a linkage change on the flag shifter. I installed the Performance Products kit on my wagon with no prob.

------------------
My FSJeep Site (http://fsjeep.homestead.com) &lt;----Click one of these----&gt; IFSJA Sticker (http://fsjeep.homestead.com/stickerpage.html)
"Mystery Machine", 360, ,K&N, TFI, Custom Turbo II 2.5" single exaust, 999 Auto, NP229, F/Dana 44F, R/AMC 8 7/8", 32X11.5 Cooper Wildcat MT, Rancho 9000's, 2" blocks, 3" Performance Products Bodylift.

[Scott]

Veepster,

Even with the 3" body lift the tires come close to the wheel well when flexing. On my wag it does clear though. And a word of advice, taking out the battery tray makes putting on the front blocks a lot easier. The lower brace for the tray makes it hard to get to the bolt in the body mount. Have fun http://www.ifsja.org/ubb/biggrin.gif

------------------
http://wsphotofews.excite.com/009/QG/Ab/p1/4K88936.jpg
88 Grand Wagoneer
401
MSD Ignition
4" Superlift Kit
3" Body Lift
33" BFG MTs
Eagle AE-063 wheels

www.real4x4.rockcrawler.com (http://www.real4x4.rockcrawler.com)

[This message has been edited by Scott (edited April 12, 2001).]

[Veepster]

thanks for the input!......I called TYRES and ordered the 3" also....so now I have a 2" and a 3"....I will decide later which one to use......andthen I will be selling the other one here on IFSJA.....

BTW....I bought the last 3" from them

------------------
Peace.............BartG

the Green Flash!
360ci
Custom 4v TBI
Edelbrock Performer Manifold
TH400, QT with low
4" skyjacker Rancho 9000's
33x12.50 BFG KO's 8" American Racing Baja Rims
Thorley headers, 3" exhaust, Dyno Max
Infiniti power leather seats
Custom billet shift knob by Millerluck
50%Luxury Car, 50%Tractor
http://www.teamgodspeed.com