what engine bolts up

[wookiewag]

I am trying to find out what engine will bolt up where my 327 AMC was. any sugestions would help

[Kenall]

none.

the bolt patern of ur trany does not match any curent found v8...

ur best bet is to find a passenger car at a tow yard lein sale and swap in the eng/trany and than adapt the xcase to the nu trany.

i was able to do this with a C350 from a malibu.

if u find an FSJ with a Buick or AMc v8/th400 late 68 to 79. u can swap them into ur frame with not much probs.

im using a 79 QT on the back of my Cth400.

------------------
Ken
1966 Super Wagoneer (http://www.home.earthlink.net/~kenns9/)
'The Predecessor'

[jeepbob]

You can also try marinas for a Chris Craft Merc Cruiser V8 as they were the AMC (read Rambler)327's. If you have a t400 with an adaptor plate there are still some adpator plates in junk yards for buicks or later AMC 6's and 8's. I scraped one for a 6 (stupid me) and have one for a buick 350.

------------------
65 wag. 360/edelbrock rb4/t400/20 t-case/4:10 d27/d44 tracloc/onboard air/onboard 110v power(no inverter)/1999 Lincoln t.c.leather buckets/taurus ctr console/winch/33x12.50/tunes/water proof door pads
soon to have new motor/d44frt/d60r(4:10)welded diff/custom bumpers
see ya in da mud