Ignition Modual Wires

[74J-20]

The 258 ignition modual has two plugs, one with 4wires, and another with 2wires. I know the 4wire plug goes to the distributor, but where does the 2wire plug go to? :confused: Into the cab to the ignition column? thanks :D
Jerimy

[RWC]

More or less. This is off the top of my head, but I think the one big fat red wire is the main 12v power-on lead, and the light blue wire is for the "open-the-solenoid-start-the-engine" feed.

RWC

[sloop]

http://www.paradise.raleigh.nc.us/album/amc258engine/aaj.gif

[74J-20]

That diagram is very helpful, but do the red and lite blue wires go to a 12V power lead and to the other feed like what RWC is saying?

[mdill]

Red is hot when ignition is in either the Start or Run position
LT Blue is hot only in Start position

Mike D.