PDA

View Full Version : HELP!!! Need Seat Mount Info!!!

gp_frk
08-08-2002, 01:42 AM
Can anyone post a picture of a seat mount for a bench seat in a J-10? Want to make sure what i got is what I am supposed to have.

[ August 08, 2002, 09:02 AM: Message edited by: jeep_freek ]
gp_frk
08-08-2002, 03:10 AM
anybody?
J4GRAND
08-08-2002, 04:16 AM
Don't have a picture to post, but the pic in my 73 TSM there are two legs, one on each side, that are attached to seat slides and mount to the floor. There is a long wire that goes from the driver's seat adjuster to the passengers side. There are also 2 smaller springs, adjuster latch lock springs; and 2 large assist springs per side. Hope this helps.
gp_frk
08-08-2002, 04:35 AM
j4 how high does the seat sit off the floor board roughly?
J4GRAND
08-08-2002, 04:43 AM
I know on mine, the sides don't sit high off the floor at all- a couple inches at most. In the front of the seats, they are probably 6 inches off the floor.
gp_frk
08-08-2002, 04:58 AM
gotta go check it out at lunch. My seat is not attached to the floor at all that much I know. But I am not sure if the bracket is there or not.
gp_frk
08-08-2002, 05:20 AM
they are there!

Thanks J4