how do I get the wood sticker off of the wagoneer

[Texas wagoneer]

I have tried everything from scrapers, solvents and heat to get that dange thing off. I have scraped it with a razer, scraper and everything I can think of...I have even tryed to heat it up and then scrape it off real fast...no luck does anyone know how to get it off the side of my wagoneer.

[AMX factor]

Go to the auto body paint store and get what is know as a Stripe Eraser. It's basically a rubber wheel you put in a drill and then you buff the sticker residue off. The rubber wheel pulls it all off.

[Chevelleguy]

3M has an adhesive remover but it will take about 7 spray cans to do the whole truck.

[oldyellowwagoneer]

I used my pressure washer with the heat turned up and a 15 degree tip. It peeled it off in nothing flat once you get it warm. Dennis

[Chevelleguy]

Didn't think of that one.

[Texas wagoneer]

Thanks guys I knew yall would come up with something....I have a pressure washer I think I will try that first since it will cost nothing...I used the 3m product and I scraped on the tail gate for about 4 hours and I still have parts that wont come off...

[MACKCOOK]

I used a heat gun and a pair of gardening gloves with the rubber bumps on on the fingers, heated up the wood grain the top part pulls off easily then rubbed or scrubbed the rubberized part-- the rubberized gloves grip the bottom half and also keep your hands and fingers cool, comes off very quickly-- no chemicals no mess and fast.
1st panel took 30 minutes-- before the gloves and i burnt my finger-- the rest of the jeep took about 45 minutes. :D