PDA

View Full Version : Good Job Guys!!!!!!!!


1jeep4me
12-17-2003, 12:42 PM
THanks to all for your help.............

The BU/Seatbelt fuse blowing issue has been resolved.. The timer. was removed and viola...............Bu lights work and fuse does not blow..
Alternator needng a little rev to start charging... resolved the minute I pulled the timer so Viola.. Alternator charges directly at start up.....
Suspension being un even and harsh... Front that is. I undid the shcakles on the front suspension....notices that the bushing ends where torn up a bit.. and watched the front suspension lower about 3/4 to 1 inch as I undid the front.. I jumped up and down on the front end syn greased the eylets etc with out pulling. retightened to 45 lbs and Viola... even suspension jounce......and a better ride .........Next will be softer shocks... So I will be selling the Nitro shock or trading for some hydro shocks if any of you are interested let me know.....

Cheers and Merry Christmas...

If you are interested in Swapping Shocks I will do local stuff I am in Dallas Texas..... smile.gif

River Beast
12-17-2003, 02:42 PM
good to hear that you got the better ride... told ya! ;)

mandoneer
12-17-2003, 04:25 PM
dont have any to traid ya but what is the travle and compressed leingth I might want to just buy them from ya

kreb
12-18-2003, 02:12 AM
what timer did you unhook? my alt won't charge without revving

benjamin

1jeep4me
12-18-2003, 03:52 AM
The shocks are on the FWP skyjacker kit I have no Idea what the length is the lift I think is 4 inch

The timer I pulled off was the seatbelt timer...My BU and Seatbelt fuse (25A) kept blowing. its by the fuse panel looks like a small 35mm film tin.