wire length

[hippymill]

I have the TFI conversion on my wag, and need to put new plug wires on. do the wires need to be a certain length, or can they just be cut to an appropriate length and have the ends put on? I am planning on using accel 8mm spiral core wires.

[89grand]

I just got pre-cut wires for a Ford truck and they worked fine, a lot easier than cutting them. But if you have these wires already just cut them one at a time to the same length as the wires that are currently on it now. If the current wires seem too long then yeah, just cut them the length you want, it may help clean things up under the hood.

[ December 17, 2003, 11:27 AM: Message edited by: 89grand ]

[woodstock]

Length doesn't matter; you can cut them yourself and put the ends on. I just bought wires for the F250 or whatever so I wouldn't have to cut them. But, the long one's were too long and the short one was almost too short. If you want it to look good, cut you own...I might do that next time around.