PDA

View Full Version : 6.2 diesel NV4500 which bellhousing?

Madcobra
09-11-2003, 07:30 PM
Does anyone know which bellhousing would allow this swap into my fsj?
rockjeep44
09-11-2003, 11:21 PM
We're going to need more info. Year FSJ, info on the engine and tranny etc.
FSJeeper
09-11-2003, 11:28 PM
Originally posted by coqinuts:
Does anyone know which bellhousing would allow this swap into my fsj?If it is a GM NV4500, a standard GM NV4500 Bellhousing will bolt right up to the 6.2.
Madcobra
09-12-2003, 04:54 AM
The 6.2 is supposedly a 1984 model, there is no flywheel or flexplate on the engine. The NV4500 is from a 1995 dodge truck. I have seen two options from Advance Adapters. Change to a Chevy input shaft, or use a bellhousing-trans spacer.
Comments?
JeepsAndGuns
09-12-2003, 09:56 AM
Go find ya a chevy NV4500 with the bellhousing still on it and sell me the dodge NV4500 for cheap. Thats about the best way I can think. ;)
Elliott
09-12-2003, 12:24 PM
The spacer is probably cheaper then the input and simpler to install. Your concern might be how far back does it locate the drive shaft yokes (front and rear) and does that require drive shaft modification?
I don't know what kind of input shaft difference you are looking at 1-2" shouldn't effect your drive shafts like a 6" spacer would.