FUSE PANEL???

[Duckman]

My stereo does not work. Well, I looked at the fuse panel and it seems to have only one slot for a fuse that normally has two posts? What gives here? :confused:

[mrtazwrench]

it's possible the post could've pushed out of the fuse box.

[Trey]

If it's near the lower left corner of the fuse block, mine has a wire inserted into this position - not a fuse..... can't say that a PO has messed with mine, though...

[DjD]

Believe it or not that socket marked “RADIO” is not for the in-dash radio. Maybe it’s for a CB radio hookup or something.
My radio is controlled by the 20 amp “ACC” fuse just above the one marked radio. The documentation I have is so conflicting that I pulled the fuse out for confirmation. That fuse should also control the clock and cig. lighter, so if they work it isn’t your problem. Keep in mind that there is also a fuse in the back of the radio to protect the system in case of a short in the radio. The radio is easy to get out once you get that black plastic bezel off, that surrounds the instruments, without breaking it.

[Duckman]

Awesome guys that is exactly what I was looking for! I will remove the radio in the morning, the clock still works, so it must be the fuse in the back. You guy's rule
:D