PDA

View Full Version : Anyone with a stock 1979 360?


DerJeep
11-28-2000, 04:23 AM
Could you please take a peek at your EGR valve, if you still have it, and let me know what the OE # is.

Thanks,
Kevin


------------------
1979 Wagoneer LTD
360/400TH/QT/44s
Warn locking hubs
2x4 Conversion

RudyC
11-28-2000, 04:27 AM
Ok but tonight when I get home. Where is the number i'm looking for?

------------------
1979 WAGONEER, 360, TH400, Q- TRAC. 3" ADD A LEAFS, 31" MUD T/A'S (PEP BOYS CLONES).
" Go farther, it only breaks on the street"

joe
11-28-2000, 04:58 AM
Kevin if it doesn't have a backpressure sensor it'll have "881" stamped on the valves face which refers to AMC p/n 321 8739.
If it does have a BP sensor it'll have a 7 digit number stamped on the face and base of the valve like 323 XXXX which is also the AMC p/n.

------------------
Regards,
-joe
63 2-dr Wag, 73 J-4000, 82 CJ-8

DerJeep
11-28-2000, 07:25 AM
Joe,

I do not have the original mounted on the jeep. I figured they all had back pressure sensors, either integral or external. Mine does not have the external sensor tubing et al, so I guess it should have an integral sensor in the valve.

Rudy, please check the number on the face of the valve. Also, please check if you have any tubing running off the valve (not the vacuum tube though)

Thanks,
Kevin

RudyC
11-28-2000, 07:48 AM
Mine is the plain jane flying saucer with no external anything except for the vacuume nipple. Still at work but I remember this because I checked it this weekend.

------------------
1979 WAGONEER, 360, TH400, Q- TRAC. 3" ADD A LEAFS, 31" MUD T/A'S (PEP BOYS CLONES).
" Go farther, it only breaks on the street"

RudyC
11-28-2000, 05:19 PM
SORRY but there is no number on it. it says "OEM NO." but its blank where a number should be. Also my vacuume diagram shows no other lines attached.

DerJeep
11-28-2000, 11:38 PM
Thanks for your effort Rudy.

justin cace
11-29-2000, 08:47 AM
got an 81 360 its got a single nipple vac line going to it the number on it is
BHJ 17075661
31002
stamped on the face no OEM though or didnt see it kind of hard to get your head back there
cleaned it up then read it between the back hood and windsheald helpful for ppl with big heads http://www.ifsja.org/ubb/smile.gif well i hope that helps you some
rod

------------------
81wag 360 tired
_________________________

rectum hell!! dam near killed him !!!