Coley
04-10-2001, 06:44 AM
I was reading in the Tech library about '86 GW's having a problem with evaporator icing problems when the temp and humidity get high.
Blows cool at first, then slowly warms up.
This kinda seems like what's happening. My A/C has been working for about 8 months now flawlessly (when it's cooler and humidity's lower). But now that it's getting warm..
Side note: When it's running, the compressor makes a rattling noise like bolts being shaken in a bucket, but that has been going on since the beginning with no noticeable problems.
The write-up says these may be the culprit:
I was wondering where the following are located on my '84 Wag:
1. A/C temperature control module (TCM)
2. Evaporator thermistor probe
Anyone know where these are located on an '84?
Thanks,
------------------
Daddy's Ice Cream Truck (3 yr old daugter named it)
360 727 NP229
Totally stock
"You're obsessed with that thing!"
[This message has been edited by Coley (edited April 10, 2001).]
Blows cool at first, then slowly warms up.
This kinda seems like what's happening. My A/C has been working for about 8 months now flawlessly (when it's cooler and humidity's lower). But now that it's getting warm..
Side note: When it's running, the compressor makes a rattling noise like bolts being shaken in a bucket, but that has been going on since the beginning with no noticeable problems.
The write-up says these may be the culprit:
I was wondering where the following are located on my '84 Wag:
1. A/C temperature control module (TCM)
2. Evaporator thermistor probe
Anyone know where these are located on an '84?
Thanks,
------------------
Daddy's Ice Cream Truck (3 yr old daugter named it)
360 727 NP229
Totally stock
"You're obsessed with that thing!"
[This message has been edited by Coley (edited April 10, 2001).]