Hydraulic roller cam for the AMC V-8!

[francis higgins]

Anybody interested in one? Write this guy and show some interest. Maybe we can light a fire under them! Use the e-mail in the header below. Here is my correspondence with Crane Cams:


<< Mr. Francis Higgins: If the engine is in fact the AMC engine, bolt down
rockers, and Not the Chrysler engine, shaft mount rocker, then yes we have
the lifters for this. The core that would allow use to make a short duration
cam compatible with the computer is not in production at this time. It
should be available in the next 90 to 120 days. The prices are going to be
the same as the Chevy components. You would need to let us know what length
pushrod to use after you setup the engine to make sure of best fit. If you
are going to adjustable rockers you will need to either go with the shaft
conversion kit from Chrysler performance of machine your heads for studs and
guide plates per the note for the AMC engines in the catalog.
Please keep in touch.

Thanks, Steve tech support 4208...

-----Original Message-----
From: Higgins, Francis (NM75) [mailto:Francis.Higgins@honeywell.com]
Sent: Thursday, April 05, 2001 1:11 PM
To: 'CustomerService@ShopCraneCams.com'
Subject: AMC camshafts


Hello. Your web site says you have hydraulic roller cams and components
available on special order for the AMC V-8. Is this true? If so, is it
possible to get a package put together for a 1990 AMC 360 (5.9)? Thanks!

p.s. you have a lifter part number 86532-16 listed as hydraulic retrofit
roller

Francis Higgins>>


------------------
Francis Higgins