Alignment after a 4" spring lift - Factory SPECS?

[will e]

Should they set the front alignment to the factory specs or is there some type of change that is required once a 4" lift is done?

[will e]

BTT

Hello gang - Am I the only one with a lift?????

Did you use factory specs?

Thanks!

[Panther]

What exactly do you mean by "factory specs"?

You want:
Caster set by whatever the lift provides
Camber = 0 degrees
Toe = 0 degrees

[Stuka]

I didnt touch mine...you shouldent have to really..as long as the axle is lined up. I let go of my steering wheel and the truck goes straight...no tire wear really...not much to adjust on a solid axle..waste of money to bring it in IMHO.

[Iron Horse]

See my post HERE (http://www.ifsja.org/cgi-bin/ubbcgi/ultimatebb.cgi?ubb=get_topic;f=2;t=013715)

:D

[will e]

Thanks guys. Yeah, they only adjusted toe in. It drove fine after the springs. I need to get a dropped pitman arm and a new stabizer but it tracked nice a straight and no tire whine.

I guess time will tell.....

If I get the complete specs I will post them.