Dana 20 Rebuild Kit

[Damage, Inc.]

I've spent two days looking online for a Dana 20 rebuild kit (brgs, seals, etc.) and I'll be d*mned if I can find one.
Does anyone know where I can locate one? ('Course you guys do!!!)

Thanks!!

[joe]

These folks will have what you need.
Novacks Adapters (http://www.novak-adapt.com/catalog/catalog_gateway.htm)

[River Beast]

http://www.thinkoffroad.com/thinkshop2/asp/product.asp?product=94&cat=57&ph=&keywords=&recor=&SearchFor=&PT_ID=

http://www.jeepdoc.com/catalog/zparts.asp

Gasket and seal kit is Part#: 8130995 $9.95 on 3rd page

http://shop.store.yahoo.com/collinsbros/dantrancas.html

The above link has bearings included

That should keep you busy for a while :D

[porkchop]

Here is another http://www.store.yahoo.com/webjeeps/dana19721979cj.html this is just incase you don't have enough to look at :D .

[Damage, Inc.]

Alright...this is great! Thanks! Guess I can't offer any more beer...I'll have to buy a keg now! Next time you're close to CO, let me know.

Now, I have another question. The shift assembly isn't in a straight line; it's in a 'U' shape and has an actual shift assembly forward of the transfer case (attached by a 12" shaft). I can submit photos if this helps. Does anyone know what the deal is? Is this just a mod for the TH400? Can I still twin-stick this bad boy?

Too many questions...too little time...and WAY too much money to spend! smile.gif

[porkchop]

That is a jeep specific shift pattern. It was like this with my old T85 also. You can twin stick it. RB made his own and a friend of scotty's, Kyrel, makes a kit for like $125. Or you can go the route I did and get the front housing from a scout D20 and the sticks from a D18 and your set. This also places the sticks closer to the seats and off the tranny hump.

[River Beast]

http://members.tripod.com/surfmac/5html

I made my own twinstick from some plate steel, 5/8" bolts lots of washers and 2 tire irons.... about $10 and 2.5 hours of work.... :D

[Damage, Inc.]

Yeah, the tire irons and golf balls were *KOOL*...I'm not a Marine Golfer so it'll have to be something else. :D

[River Beast]

Originally posted by Damage, Inc.:
Yeah, the tire irons and golf balls were *KOOL*...I'm not a Marine Golfer so it'll have to be something else. :D Me neither... I HATE GOLF!!!! :D That is the ONLY use for golf balls in my agenda... ;)

[scotty]

kyrel does still have some,i believe,email him at wells1042@yahoo.com if you have any questions bout em.

[matt0481]

PC, do you have any pics of this. I have the chance to get a D18 for $40. I definately want twin stick but clueless as to what's needed. I have the resources to fabricate it, but bolt-ons are better. The D18 is from a Scout and I already have a 727/D20 from a Scout that intend to cannibilize from.

Thanks,
Matt

[porkchop]

Yes I have some pics. They are not on my site but I can email them to you. What would you like to see. The installed case or the uninstalled case?

[matt0481]

Both would be great since you have them.

cox2307@cox.net

Thanks