View Full Version : fuel injection gurus.....
10-05-2005, 11:21 AM
i have a small 2d (holley) injection system....i am getting ready to upgrade motors (454 on the way) and was wondering if there is anything i can do to keep this system...can i use a tbi assembly off of a 454 and run it with the holley ecu??? i also read in a performance book that you can add another holley tbi unit to the set up...(using a dual quad intake)...anybody have any ideas??????
10-05-2005, 11:25 AM
e-mail the guys at affordable fuel injection the helped me set up the ful injection in the 360 dodge in my 78 cherokee got rid of all the pollution crap and it works awesome
10-05-2005, 11:34 AM
email sent....anybody else have any ideas....
10-05-2005, 12:09 PM
The Holley 2D system can be used with the big block, you just hook the pink wire in the main harness to a 12v source that is hot in crank and run positions and readjust your ECM. Holley says the system can handle 275hp but I have seen it on a dyno on a 320hp small block and it did fine. The Holley throttle body is the same size GM used on their 454 trucks.
10-05-2005, 01:08 PM
I don't know what car this came out of but the 454 but i am sure the HP is around 275. The 454 had low hp #'s because of the long stroke but people buy the 454 for torque.my suggestion would be to sell the holley and use that money (and a little more) and get a injection system for the 454. if you want to keep the holley i don't think it would be real hard to get taken care of.
10-05-2005, 01:09 PM
i wasnt sure the holley ecu would run a different injector...also, i am not sure i can score a whole gm wiring set up....not too many junk yards around here that let you pull your own parts....so you end up paying top dollar for those kinda parts..
10-05-2005, 01:11 PM
its not a car motor...it is a truck block (assuming) because it is coming out of a 73 camper..
10-05-2005, 02:05 PM
Regardless, your Pro-Jection system will work on it.
10-05-2005, 02:43 PM
n omatter what Car, truck, vehicle, camper, van, rv. It will still have only around 275 HP so your system should work i don't see you needing anything different but maybe injectors but if you put in any performance parts you would need one made to handle that. A cam and few other small upgrades really beef up the 454 (if you care about the HP #)
10-05-2005, 07:09 PM
the early projection control box had a switch in side for small block or big block
10-06-2005, 09:04 AM
cool....maybe i will try my projection...
vBulletin v3.5.4, Copyright ©2000-2013, Jelsoft Enterprises Ltd.