PDA

View Full Version : PLOW QUESTION???????


Jeep Craze
01-23-2002, 12:23 PM
I was wondering if a plow off an 81 Grand Wagoneer would fit on an 80 J-10. Thank you in advance Craig

Cecil14
01-23-2002, 01:46 PM
Probably not. The frame is wider on the J-10 than it is on the wag. If you can get a frame bracket for a J-10 or modify the one from the wag then yes, otherwise no.

Anthony

Jeep Craze
01-24-2002, 08:57 AM
Dang it, I was able to get an 81 wag w/ power angle plow for 500.00 Guess I will just have to let this one slip past. Thank you Cecil for replying and saving me the embarasment of finding out the hard way. Craig

Crazy_Jeepman
01-24-2002, 11:45 AM
THE FRAME IS NOT ANY WIDER THAN THE WAGONEERS ARE AT THE FRONT OF THE J10. THE ONLY THING DIFFERENT IS THE FENDERS. I WOULD SAY YES THE PLOW WOULD FIT. ;)

Jeep Craze
01-24-2002, 12:07 PM
Crazy

That is the answer I was looking for. I thought the fronts were the same because of the motor mounts and all.....But I didn't actually measure. Thank you for your input I will measure just to be 100% sure. I think the deal I was offered sounds pretty good. Thanks agian Craig

Gladi8r
01-24-2002, 09:26 PM
Power angle for $500 :eek: I should say, you got a mighty fine deal for around here :D

Jeep Craze
01-25-2002, 09:12 AM
Hey Gladi8r,
Yeah I thought it was a fine deal as well. The wag has some problems but nothing alittle tinkering can't fix.

Cecil14
01-28-2002, 10:32 AM
OOPS! Sorry about that. I guess because the narrow trac front end is narrower than the trucks I assumed the frames were too. I didn't even think (typical)!! Hope you didn't miss this deal because of me.

Sorry again,
Anthony :D