My 79 Cherokee Budget build aka. Flagstaff

[Eugene 1]

well here is my build i purchased my 79 Cherokee in Flagstaff, Arizona from the previous owners at Vintage Salvage, they were very nice people and easy to deal with. after some negotiation i was able to get it for a little less than the asking price $650.

I used www.uship.com (http://www.uship.com) to find a shipper who could get it to Kansas for the best price, as luck would have it i found a Shipper we made the deal and it arrived here on the November 23rd here are some photos.


http://i216.photobucket.com/albums/cc50/rdxprss/79%20Jeep%20Cherokee%20Yellow/leejeep005.jpg
http://i216.photobucket.com/albums/cc50/rdxprss/79%20Jeep%20Cherokee%20Yellow/leejeep003.jpg
http://i216.photobucket.com/albums/cc50/rdxprss/79%20Jeep%20Cherokee%20Yellow/leejeep002.jpg

http://i216.photobucket.com/albums/cc50/rdxprss/79%20Jeep%20Cherokee%20Yellow/leejeep007.jpg
the above pic was taken after it was running. took about an hour and only has reverse.. the pics below are from fLagstaff

http://i216.photobucket.com/albums/cc50/rdxprss/79%20Jeep%20Cherokee%20Yellow/cherokee-1.jpg
http://i216.photobucket.com/albums/cc50/rdxprss/79%20Jeep%20Cherokee%20Yellow/truck3.jpg
http://i216.photobucket.com/albums/cc50/rdxprss/79%20Jeep%20Cherokee%20Yellow/truck2.jpg
http://i216.photobucket.com/albums/cc50/rdxprss/79%20Jeep%20Cherokee%20Yellow/truck1.jpg

[baybilly]

looks like a solid start. :thumbsup: :thumbsup: Congrats. whats the plan for it?

[Ristow]

looks good. ditch the wheels.

[Eugene 1]

The plan right now is to get it running and driving well. Ive already started making mods to it weather permitting it still needs a cleaning and so on, i installed a used 79 grill to replace the busted one seen in the pics im also working on a Cooling fan setup and the transmission issue which will be resolved soon! more pics:

http://i216.photobucket.com/albums/cc50/rdxprss/79%20Jeep%20Cherokee%20Yellow/1293863768.jpg
mock up radiator
http://i216.photobucket.com/albums/cc50/rdxprss/79%20Jeep%20Cherokee%20Yellow/1293863769.jpg
grille installed
http://i216.photobucket.com/albums/cc50/rdxprss/79%20Jeep%20Cherokee%20Yellow/1293863770.jpg

[seamus]

Nice truck, I'm jealous , I wish I had a arizona truck to start with.

[Eugene 1]

Thanks Baybilly ! and Mike i thought you would like those lol they will be on for a while until i find something better lol.

also I used that Rockauto.com they dohave a lot of 79 cherokee stuff here is what i got from them.

2 battery cables Standard brand
2 front brakehoses Bendix
1 Acdelco Transfilter and gasket set

All quality stuff and shipped to me 54.00 bucks!! autozone and Oriellys wanted 23 dollars per brake hose Alone!

Thanks Seamus it is better to start with less rust when you can, but this one needs a floor board oneside

[Ristow]

why not that razor i see in the back?

[Eugene 1]

No buckets right now.i was going to buy some, but its not a must have right now. oh i got new door locks and tumbler for the ignition.

Iam keeping track of what i spend on "Flagstaff" to get it running so far including shipping iam up to $1,275

[Ristow]

im keeping a tab on what i spend.... __________________

why would you do a dumb depressing thing like that??

[Eugene 1]

yeah i know ,but its fun and it makes me a little more mindful of spending lol

[tkiller13]

Cool sticker package. Keeping track of money spent......you will haved saved a bunch of money starting with a rust free jeep. :thumbsup:

Pics of the 1970 daytona are needed please.

[Eugene 1]

exactly it has some rust one floor board but i can replace that everything else it pretty solid just surface stuff:drivin:

[Ristow]

you can cut up the hood of the '70 Daytona for patch panels.....


:hide:

[Eugene 1]

Righttttt... when you drop that small block shivvy in your fsj

[sublime88GW]

I've always liked that color combo on the cherokee chiefs, it reminds me of french vanilla icecream mmm. That was a steal for what you got it for It looks nice.

[seamus]

Thanks Seamus it is better to start with less rust when you can, but this one needs a floor board oneside[/QUOTE]


I hear you , mine was supposedly rust free, so far two floor pans , one flare , one inner flare, rear sill , partial quarter,bracing between the rear sill and the inner quarters, floor in front of both rear wheels....

Like I said jealous!

[Eugene 1]

Cool sticker package. Keeping track of money spent......you will haved saved a bunch of money starting with a rust free jeep. :thumbsup:

Pics of the 1970 daytona are needed please.

it is in progress too the car is torn apart and long way off but its getting there and it will be going to the body shop this Spring im hoping. while i rebuild the suspension,interior,etc the nose is needing some fiberglassing and so on i have no pics of the car together because the car started out as 70 Charger.. there is no such thing as a 70 Daytona it was one year only thing 1969 which is what the car will like when it is done


I didnt want to take up space so i just posted the links,but this was last winter it has gone through some changes since

[mweath1]

so which 5.9 you putting in????? that one we picked up today would sure look nice in it....... you know that inferior but bad@ mopar stuff we like. by the way thats a cool looking olds in the background;) lol

[Eugene 1]

not sure yet....Im thinking it won't be the AMC one:eek:

[Eugene 1]

Well after much thought Iam going with a Hybrid engine well sort of... i decided im going to use my MoPar setup La short block wth Magnum heads with headers:hide:.. i will be taking some pics and posting in here tomorrow with the engine removal and so on

The AMC 360 runs great 40 psi oil pressure all the time it is an excellent condition, but its just not what i want:drivin:

[Eugene 1]

here are some pics of teardown,powerwashing ,engine removal etc. etc.

http://i216.photobucket.com/albums/cc50/rdxprss/79%20Jeep%20Cherokee%20Yellow/yellowmagnum.jpg
http://i216.photobucket.com/albums/cc50/rdxprss/79%20Jeep%20Cherokee%20Yellow/leestuff016.jpg
http://i216.photobucket.com/albums/cc50/rdxprss/79%20Jeep%20Cherokee%20Yellow/leestuff017.jpg
http://i216.photobucket.com/albums/cc50/rdxprss/79%20Jeep%20Cherokee%20Yellow/leestuff018.jpg

[Eugene 1]

http://i216.photobucket.com/albums/cc50/rdxprss/79%20Jeep%20Cherokee%20Yellow/leestuff019.jpg


http://i216.photobucket.com/albums/cc50/rdxprss/79%20Jeep%20Cherokee%20Yellow/leestuff037.jpg
http://i216.photobucket.com/albums/cc50/rdxprss/79%20Jeep%20Cherokee%20Yellow/leestuff036.jpg
http://i216.photobucket.com/albums/cc50/rdxprss/79%20Jeep%20Cherokee%20Yellow/leestuff035.jpg
http://i216.photobucket.com/albums/cc50/rdxprss/79%20Jeep%20Cherokee%20Yellow/leestuff033.jpg
http://i216.photobucket.com/albums/cc50/rdxprss/79%20Jeep%20Cherokee%20Yellow/leestuff032.jpg
http://i216.photobucket.com/albums/cc50/rdxprss/79%20Jeep%20Cherokee%20Yellow/leestuff031.jpg
http://i216.photobucket.com/albums/cc50/rdxprss/79%20Jeep%20Cherokee%20Yellow/leestuff030.jpg

http://i216.photobucket.com/albums/cc50/rdxprss/79%20Jeep%20Cherokee%20Yellow/leestuff029.jpg

http://i216.photobucket.com/albums/cc50/rdxprss/79%20Jeep%20Cherokee%20Yellow/leestuff040.jpg
http://i216.photobucket.com/albums/cc50/rdxprss/79%20Jeep%20Cherokee%20Yellow/leestuff039.jpg

[mweath1]

:D im so glad it was so greasy gave me a great excuse to buy a powerwasher its cleaning up great though

[Gambler68]

Gitterdun! :thumbsup:

[Eugene 1]

LOL@ Gambler! looks like more cleaning today..anyone need a Qt with Mile marker conversion? works excellent 75$obo

[Tad]

Coming along there nicely Lee :thumbsup:

[SEdmonds]

SO nice to see this old girl come back to life. Looking forward to seeing it as it moves along.

[suttonlive]

PM sent about QT

[SnowShoe]

:cool: :cool: :cool: :cool: :cool: :cool: :thumbsup:

[FSJ Guy]

Do you ever :D when working on your Jeep? You guys look so serious! LOL!

[Eugene 1]

it is serious work especially when tomorrow's high will be 13f and we only had 2 days to strip this thing down! i will try to work in a smile next time !:thumbsup:

[[]V[]AXX]

Wow, watching you do that with the front clip off, I feel like an idiot for doing mine with it still attached. I now have to pull down my front clip to do some rust repair and painting. Well, hind sight is 20/20.

The more I see these wide track chiefs. The more I want one!

[Eugene 1]

correction to my last post the high will only be 12 with strong winds.. that is all!

yeah we pulled the clip to do some much needed Cleaning and to weld the new motor Bj motor mounts in,we will also be doing some rust repair as well.

[Eugene 1]

a few little updates here

moving over to storage weather is looking bad
http://i216.photobucket.com/albums/cc50/rdxprss/79%20Jeep%20Cherokee%20Yellow/1296513999.jpg
http://i216.photobucket.com/albums/cc50/rdxprss/79%20Jeep%20Cherokee%20Yellow/1296513995.jpg

cuda exhaust tip from my old cuda

http://i216.photobucket.com/albums/cc50/rdxprss/79%20Jeep%20Cherokee%20Yellow/1297386561.jpg

More to come when the weather warms up .
We still need to do some cleaning,ok a lot of cleaning.. weld in the drivers side floor pan, protect the inner fenders fix flares and then mount engine with bjs mounts body and paint will come much later , it will be the original yellow

[Eugene 1]

looks good. ditch the wheels.

wheels are coming off Mike.. good bye 15s hello 22s lol !

[Eugene 1]

project is still going ,but slowly since i live in Wisconsin now i will keep you updated

[austinaubinoe]

wheels are coming off Mike.. good bye 15s hello 22s lol !


Wow if you still want a decent sidewall your gonna need to run like 54's :D

Why go through the trouble of the the chryco 360 if your not getting a FI Magnum? Or did you already have the motor?

Yellow cherokees are sweet!

[AMC4ME]

I had that exact same Cherokee of color, pinstrip, and year but mine was not a W/T. Does this critter also have quadra-trac? Very nice and I loved that cream color!

[CJ the noisemaker]

Hey, it's the cheokee from The Walking Dead!

[Eugene 1]

it once had qt..the 5.9 was an easy choice:thumbsup:
and its not that much trouble/no oiling issues tons of parts

[Eugene 1]

The 5.9 i will be using is Dodge related........

http://i216.photobucket.com/albums/cc50/rdxprss/1322527360.jpg
http://i216.photobucket.com/albums/cc50/rdxprss/1322527358.jpg
http://i216.photobucket.com/albums/cc50/rdxprss/1322527356.jpg

The 3rd picture is why it was so cheap... its rusty but trusty!

[mweath1]

rusty but trusty lol:thumbsup:

[SnowShoe]

:thumbsup: :thumbsup: :thumbsup:

[Ristow]

i'll take the axles and flatbed off your hands.

when you getting the cherokee back out of KS?

[Eugene 1]

Not sure yet . keeping axles im probably going to drive it home. pull the drivetrain for the cherokee..

[mweath1]

http://i216.photobucket.com/albums/cc50/rdxprss/th_video-2011-12-21-14-15-18.jpg (http://s216.photobucket.com/albums/cc50/rdxprss/?action=view&current=video-2011-12-21-14-15-18.mp4):thumbsup:

[Eugene 1]

headed to Ks to start work on Cherokee more to follow!:thumbsup:

[mweath1]

bring it on im waiting for ya lol

[Eugene 1]

Drove the Donor 665 miles to Ks.I made it safely after some rest we started tearing apart the truck front clip is off and Engine/Trans are about ready to come out,
pics to follow:fsj:http://i216.photobucket.com/albums/cc50/rdxprss/79%20Jeep%20Cherokee%20Yellow/1330569397.jpghttp://i216.photobucket.com/albums/cc50/rdxprss/1330569396.jpg

[lobie]

What yr is the cummins?

Looking forward to your pics.
Using the complete drivetrain will save you time and money :thumbsup:

[Eugene 1]

92D350 intercooled D60/D70 :thumbsup:

[lobie]

92D350 intercooled D60/D70 :thumbsup:

Mines not intercooled and I have debated putting one on. I just keep telling myself it's more work. :D

[Eugene 1]

Yeah its going to be some work.the intercooler is biggg.

[3rdelement]

pictures!! :)

[fulsizjeep]

Wow, all this chatter and I just realized it is an oil burner project. I thought the 5.9 was a gasser. :rolleyes2: Good Luck!

[mweath1]

we got a little progress done today
http://i1222.photobucket.com/albums/dd483/mweath1/imagejpeg952.jpg

[lobie]

we got a little progress done today
http://i1222.photobucket.com/albums/dd483/mweath1/imagejpeg952.jpg

How much of the bottle did it take? :D

[Heavy_Metal_Thunder_81]

we got a little progress done today
http://i1222.photobucket.com/albums/dd483/mweath1/imagejpeg952.jpg
YES! :thumbsup::thumbsup: One of the best pics on this thread hahahaha

[Eugene 1]

lol @ u guys it didnt take much ,but everything on that truck is so Ruuussssttttyyy!

[Resbum]

Neat build. Subscribed.

[JeepinPete]

Love the picture! Its been my experience that the rusty one come apart the fastest. Rather than having to fully thread the nuts off the bolts, you just snap the bolts :D What could be quicker :lol:

[Eugene 1]

ok a few pics after working hard at this for a few days http://i216.photobucket.com/albums/cc50/rdxprss/1330930185.jpg


http://i216.photobucket.com/albums/cc50/rdxprss/1330930195.jpg
http://i216.photobucket.com/albums/cc50/rdxprss/1330931885.jpg

A Weld came loose soooo

[Ristow]

ok a few pics after working hard at this for a few days

what?? where's the motor? you guys taking union coffee breaks?

:D

:hide:

[Resbum]

Cool beans. Looking good.

Since you have the frame so exposed, and have already found one broken weld, take a really good look where the steering box mounts. The welder I hired to do my critical welds found two cracks in the frame where the steering box mounts, while welding my new shackle mounts.

This would mean you have to take it off the frame, but at this point that's a minor thing to do while it's all tore apart anyways.

Resbum

[Eugene 1]

[quote=Resbum]Cool beans. Looking good.

Since you have the frame so exposed, and have already found one broken weld, take a really good look where the steering box mounts. The welder I hired to do my critical welds found two cracks in the frame where the steering box mounts, while welding my new shackle mounts.

This would mean you have to take it off the frame, but at this point that's a minor thing to do while it's all tore apart anyways.

Resbum[/quote
Thanks RES , yeah we checked everywhere after that !
@Mike :rolleyes:

here are a couple of pics of the Factory Dodge crossmember being modified to fit the Cherokee frame
http://i216.photobucket.com/albums/cc50/rdxprss/1330930188.jpg
http://i216.photobucket.com/albums/cc50/rdxprss/1330928527.jpg
http://i216.photobucket.com/albums/cc50/rdxprss/1330930190.jpg
drill holes through the welded on spacers
bolted in the chero
http://i216.photobucket.com/albums/cc50/rdxprss/1330928526.jpg

[Eugene 1]

front view of mount
http://i216.photobucket.com/albums/cc50/rdxprss/1330928525.jpg
The first of a couple attempts to get this in there safely

http://i216.photobucket.com/albums/cc50/rdxprss/1330928528.jpg
http://i216.photobucket.com/albums/cc50/rdxprss/1330928523.jpg

and finally in its permanent home with out the front clip
http://i216.photobucket.com/albums/cc50/rdxprss/1330928407.jpg
http://i216.photobucket.com/albums/cc50/rdxprss/1330928405.jpg
http://i216.photobucket.com/albums/cc50/rdxprss/1330928403.jpg
http://i216.photobucket.com/albums/cc50/rdxprss/1330928401.jpg
http://i216.photobucket.com/albums/cc50/rdxprss/1330987618.jpg

[Eugene 1]

Sheetmetal installed. Transmission in place
http://i216.photobucket.com/albums/cc50/rdxprss/1330987623.jpg


http://i216.photobucket.com/albums/cc50/rdxprss/1330987629.jpg

next will be the details getting it running,drive shafts ,steering brake lines fuel tanks etc. etc.

[Ristow]

WOW! that dropped in clean as a whistle! :thumbsup:

[Eugene 1]

yeah probably not that clean, but its in there lol..it went better than i thought it was going to go.

[lobie]

See what u can do w/o the bottle in ur hand!
Looks good!

[Heavy_Metal_Thunder_81]

Wow you made that look so easy. I never thought of using the Dodge cross member, I always see people fabbing up custom mounts and such. Your way so much easier looking.

[Eugene 1]

See what u can do w/o the bottle in ur hand!
Looks good!

LOL:thumbsup: yeah my buddy Matt(Mweath) and i were "Brainstorming"

[Eugene 1]

Wow you made that look so easy. I never thought of using the Dodge cross member, I always see people fabbing up custom mounts and such. Your way so much easier looking.

yeah i thought of using the crossmember because the Dodge and Amc frames are very similar in Width maybe 1/2 -1 inche off.. Chevy is about 2-4 inches difference.

Thanks for the props guys, but Mweath helped out a ton ! it would have been serious struggle with out his help

[Eugene 1]

1 more underhood shot before i get back to Wisconsin I still have a ton of stuff to do !
http://i216.photobucket.com/albums/cc50/rdxprss/1331222731.jpg
http://i216.photobucket.com/albums/cc50/rdxprss/1331222732.jpg

[cu4whln]

:) :)

Is the radiator and intercooler going to fit OK ??

Have another slug off that bottle ....:D

[Eugene 1]

:) :)

Is the radiator and intercooler going to fit OK ??

Have another slug off that bottle ....:D

I will probably need a couple of slugs off that bottle before its all over !:D

not sure on the radiator yet intercooler prob. not but we will see:thumbsup:

[ross80truck]

Just subscribed! Looks great. Are those the factory front springs? If not, what springs are you using.

[JeepinPete]

How much space between the back of the head and the firewall? I looks like the fan is sitting where the radiator use to.

[Eugene 1]

Just subscribed! Looks great. Are those the factory front springs? If not, what springs are you using.

Thanks yes they are the factory springs. it s now SOA

[Eugene 1]

How much space between the back of the head and the firewall? I looks like the fan is sitting where the radiator use to.

about 2 inches...the fan works,but i will be using a electric fan in the front clip is not sitting on straight

[ross80truck]

Do the factory front springs look like they are holding the weight okay?

[olllllo]

Finally getting caught up on this awesome build. Subscribed! :thumbsup:

[Eugene 1]

Do the factory front springs look like they are holding the weight okay?

The Springs seem ok they need bushings, but other than that they seem fine it is sitting full weight with the exception of the intercooler and radiator..the Soa really helped out a lot!

*the engine is pretty close to the firewall too*

Thanks Dave:thumbsup:

[Eugene 1]

Nothing new to report,Iam going to have to order the folllowing parts

1 Rear shackle flip from Bjs to level out the rear i have that "GangstaLean" going on..

2. Fuel tank from Aerotanks the Od unit hits the tank so im moving the tank to the rear with one of their rear mount 27 gallon tanks anybody need a rustfree tank and skid plate??

3 Radiator order from Summit Chevy/Dodge style build tabs to mount or use New stock Style radiator with the tanks reversed..

next making everything work together:thumbsup:

[ross80truck]

Is there any update on this project? Sure would like to hear how it is coming along!

[Eugene 1]

I Have not been workin on it as much as i like. I will be getting back to it this fall or sooner hopefully:thumbsup:

Do not Worry project is not Dead!!

[Eugene 1]

Update:
I purchased a set of gauges they are VDO and Fuel tank from a 91 shivvy blazer. :thumbsup: Lobie.. High steer arms for D-D60. Im waiting on the word on a rear shackle flip kit from another member here
http://i216.photobucket.com/albums/cc50/rdxprss/1358436660.jpg
http://i216.photobucket.com/albums/cc50/rdxprss/gastank.jpg

[Resbum]

Nice. Glad to see you're still making progress. I notice a pyrometer probe with your gauges, but no gauge.

FYI- I went with the same VDO style because it has the largest selection of gauges that look the same of any manufacturer. Isspro offers a few more gauges that look almost identical, if you need them. I think I ended up with two of them to monitor things that VDO didn't offer. Side by side they're almost a perfect match.

[Eugene 1]

Thanks Resbum I have the Gauge its just not in the picture. yeah im looking forward to getting back to work on it

[lobie]

Tank ready to ship tomorrow.

http://i1121.photobucket.com/albums/l508/ksloburk/79%20Cherokee%20Chief/7D0C0794-B1E8-4770-9201-DC3D525758F3-2470-0000010673880CE4.jpg

[Eugene 1]

Awesome thanks man !!

[lobie]

Slacking off, why ain't this done! :D

[1jeep]

Haven't been on the site for a long time. First thread and I'm hooked again.:thumbsup:

[Eugene 1]

Slacking off, why ain't this done! :D

LOL:thumbsup: work will resume on my Vacation in April

[Mikel]

Loooking good!:thumbsup: :thumbsup:

[Eugene 1]

Loooking good!:thumbsup: :thumbsup:

Thanks :thumbsup:

[Eugene 1]

Ok here we go some improvements were made while I was on vacation ill just let the photos do the talking
http://i216.photobucket.com/albums/cc50/rdxprss/79%20Jeep%20Cherokee%20Yellow/2013-04-25204831_zpsf875f11f.jpg (http://s216.photobucket.com/user/rdxprss/media/79%20Jeep%20Cherokee%20Yellow/2013-04-25204831_zpsf875f11f.jpg.html)
http://i216.photobucket.com/albums/cc50/rdxprss/79%20Jeep%20Cherokee%20Yellow/2013-04-25204902_zps0b235771.jpg (http://s216.photobucket.com/user/rdxprss/media/79%20Jeep%20Cherokee%20Yellow/2013-04-25204902_zps0b235771.jpg.html)
http://i216.photobucket.com/albums/cc50/rdxprss/79%20Jeep%20Cherokee%20Yellow/2013-04-26123318_zps2b8da55f.jpg (http://s216.photobucket.com/user/rdxprss/media/79%20Jeep%20Cherokee%20Yellow/2013-04-26123318_zps2b8da55f.jpg.html)
http://i216.photobucket.com/albums/cc50/rdxprss/79%20Jeep%20Cherokee%20Yellow/2013-04-25205729_zps8f67d2a4.jpg (http://s216.photobucket.com/user/rdxprss/media/79%20Jeep%20Cherokee%20Yellow/2013-04-25205729_zps8f67d2a4.jpg.html)

[Eugene 1]

and more fitting
http://i216.photobucket.com/albums/cc50/rdxprss/79%20Jeep%20Cherokee%20Yellow/2013-04-26150033_zpse28a5e5c.jpg (http://s216.photobucket.com/user/rdxprss/media/79%20Jeep%20Cherokee%20Yellow/2013-04-26150033_zpse28a5e5c.jpg.html)
http://i216.photobucket.com/albums/cc50/rdxprss/79%20Jeep%20Cherokee%20Yellow/2013-04-26150014_zps1253564d.jpg (http://s216.photobucket.com/user/rdxprss/media/79%20Jeep%20Cherokee%20Yellow/2013-04-26150014_zps1253564d.jpg.html)

We fully welded the floor in I got so excited I forgot to take pics of it!!!!

[Eugene 1]

ok here are a few more photos my 7/8 Jam nuts to build my DOM tubing steering link. below is the mock up to my new high steer arms I am using crossover steering right now. I need lift springs for full high Steer
http://i216.photobucket.com/albums/cc50/rdxprss/79%20Jeep%20Cherokee%20Yellow/0507131007_zps4b353412.jpg (http://s216.photobucket.com/user/rdxprss/media/79%20Jeep%20Cherokee%20Yellow/0507131007_zps4b353412.jpg.html)
http://i216.photobucket.com/albums/cc50/rdxprss/2013-04-25144432_zps66a7945d.jpg (http://s216.photobucket.com/user/rdxprss/media/2013-04-25144432_zps66a7945d.jpg.html)
http://i216.photobucket.com/albums/cc50/rdxprss/2013-04-25144449_zpsf1d52020.jpg (http://s216.photobucket.com/user/rdxprss/media/2013-04-25144449_zpsf1d52020.jpg.html)

[Eugene 1]

The mock up using the old jeep tie rod link and piece of 50 cent pipe
http://i216.photobucket.com/albums/cc50/rdxprss/2013-04-25164407_zps6b8f0ab5.jpg (http://s216.photobucket.com/user/rdxprss/media/2013-04-25164407_zps6b8f0ab5.jpg.html)
http://i216.photobucket.com/albums/cc50/rdxprss/2013-04-25164509_zps10c91725.jpg (http://s216.photobucket.com/user/rdxprss/media/2013-04-25164509_zps10c91725.jpg.html)
http://i216.photobucket.com/albums/cc50/rdxprss/2013-04-25171723_zps07ef0115.jpg (http://s216.photobucket.com/user/rdxprss/media/2013-04-25171723_zps07ef0115.jpg.html)


Mock up done now to get tubing ! to finish up the steering!.. oh and I got this too:
http://i216.photobucket.com/albums/cc50/rdxprss/79%20Jeep%20Cherokee%20Yellow/0504131439_zpsf26cd9e4.jpg (http://s216.photobucket.com/user/rdxprss/media/79%20Jeep%20Cherokee%20Yellow/0504131439_zpsf26cd9e4.jpg.html)