What is the most wanted aftermarket part that doesn't exist?

[bchesley]

This is a survey of what is the most wanted part for our FSJ's that either no one makes or there is no selection. Here are some examples.

Bumpers?
Skidplates (transmission and or Transfercase)
Rocker guards?
Roof Racks?
Tire Carriers?
Heavy Duty Steering systems?

What is it that every body wants. Reason being is that I might be set up to start manufacturing some of these part!! So let me know!!

[Iron Horse]

Fender Flares- BIG ones for 35's or so.

BTW, I do believe AGR makes a HD steering system that will fit FSJ's.

[nfroio]

I would love to find a 3" Cowl Induction hood that would bolt onto an '87 Grand Wag.

Depending on the direction I take with the wag, Ground Effects Kits, would not be bad.

Thinking of maybe going for the FSJ-Drag Car look???

[TPICherokee]

Roof racks are made for these. You just have to weld up the holes to your factory one and put on some mounts that clamp on to your drip rail. Although welding up the factory holes is kind of a pain in the a%$.

[Dan]

Here's a dream. How about a TPI intake manifold? Now I would like that!

[OBX-AUTOMOTIVE]

HOW ABOUT THIS....FACTORY SHEET METAL..IN NICE FACTORY CARDBOARD BOXES....WITH AMC STICKERS ON THEM!!!FROM AN AMC PARTS DEPARTMENT....FROM YOUR LOCAL AMC DEALER, DOWN THE STREET!!!!! NOW!!!!!........ HOW IS THAT FOR DREAMING ......ME!!!!!!! :( :cool: :rolleyes:

[Mikel2]

An spray that will repair rusted quarter panels and fender flares :rolleyes:

[Scottf]

A skid plate replacement for the rusted out gas tank skid plate. Frame rails for the rusted frame rail next to the gas tank skid plate.

[Joe H.]

How 'bout replacement QT cones/clutches? Ditto the suggestion on body panels, and I'd like to add factory Rhino kits for under $200!

[Snakeyes_Tx]

Okay guys...

Thule makes a roof rack, look on my 83 Wag's website to see it.
www.usbody.com (http://www.usbody.com) makes a 3" fiberglass cowl hood, check out the model! She's HAWT!

What doesn't exist?

The Edelbrock "Complete Power Package" with Heads and all. That or the "Accu-drive" timing gear set.

How about 393 Stroker kits?

A bolt on Dana 60 with all shock perches and mounts for the front in the right places!

[woodybeone]

"AutoRustech" @ 401-944-4444 makes a frame rail repair kit to cap the section next to the gas tank where the skid plate bolts up to (and rots away). $150.00.

[SLINKY]

I would like a molded bug sheild that wraps around the hood.

molded the same shapes as the front edge of the hood

[Gladi8r]

I am easy to please, I just want a 4" lift kit for my Gladiator :confused:

[Lindel]

Multi Port Injection, bolt on coil spring suspension, space for a true dual exhaust on my 79 Chero

[WillyPete]

CUP HOLDERS!!!

:D

[trickc]

4-6" lift kits for the early J's an Wags with the shorter leaf springs.

The fender flares for 35's would be nice too.

ok and some sort of cup holder to mount under the dash and folds out like on some of the new cars.

OOH OOH! speaking of parts made from unobtanium, nice new J truck tailgates would be killer!!! :eek:

[Dan in Fairway]

Good original interior trim. Also, how 'bout a new steering wheel? And paint that matches in spray cans? Rear wiper motors, them little door switches, Oh yeah, American Flags!

[Sitting Bull]

How about a newly designed tailgate that lets to window pop-up and fold back. Get rid of that (insert adjective here) tailgate window setup, and I'll buy it!

In a wierd sort-of way, I like not having any aftermarket crap. Just gives me more respect when I seen one done up nice, some serious work had to go into it. I could go get a CJ and all the accessories in the world in less than two days, but it warrants no "wow, that's cool."

The stuff that is made is usually high quality by FSJ owners and usually not for much profit, now that's cool.

[ October 04, 2001: Message edited by: Sitting Bull ]

[Michael]

What are you thinking of? I know how inexpensive the tube steel is. I built my race car chassis out of it. Put some heads together and there could be some affordable armor that could withstand a beating. That you could turn a really nice profit from. Without charging $400 for a bumper which in my opinion is overkill, and etc. I have been thinking that myself. Keep us posted make it I will buy it :D

[derf]

An emissions legal, bolt-on multipoint fuel injection system, like the ones Edelbrock makes for Chevy and Ford motors. That would be nice.

[blt2krl]

A full roll cage that bolts or is welded to the frame, ladder traction bars,truss and differential skid plate kits, double shock hoops, rear bumper with spare tire carrier that goes need funding from the government to buy. I guess that sums up the list for right now.

[<Adamstrator>]

Body armor... rocker skids/skid plating, stuff like that. Not much aftermarket bolt on stuff for body's of FSJ's. Roof racks and such can be found though, nothing made specific for FSJ's but quite often, other stuff will fit.

[okidoc]

Fun Fur seat covers, day glow wood trim, gear reduction wheel hubs and chainsaw bumper trim.

Seriously I would love a TPI setup and a simple 229 cable conversion kit.

[solar@clnk.com]

Heavy-duty muffler bearings would be nice :D

[64Trvlr]

All I want is a motor that has 500 ftlbs of torque @ 2100 rpm and gets 45 mpg. And a squeek free Jeep with A/C.
:cool:

[Snakeyes_Tx]

Oh yeah, and a belt driven blower! ****it! Why not?!

[Simontrips]

Automatd mechanic to do repairs and mods,why not

[okidoc]

I agree w/ Snakeeyes "****it!"

[bchesley]

I was mainly talking about body armor and protection pieces. I don't know how serious you guys are about off roading but I am going to abuse mine on the trail, and I need some body protection. I will draw some of my ideas and post them. Then I will see how what everyone thinks.

[Dome]

bchesly: Some body armor would be real nice, especially some low profile rocker skids. By that I do not mean 3" nerf bars that are basically just a waste of space/ground clearance. Some kind of 1"x4" rocker skid or some 1" round tubing for the rockers would be really cool :D

[64Trvlr]

Brad ask a question like that and you'll get answers....... As for serious wheeling come on up and see how we wheel in WY. My Jeep has plenty of dents , dings and pinstriping. But 500 ftlbs of torque and 45 mpg would be great.
:cool:

[Erix Jeep]

Brad, I like Adamstrator's idea on body armor. Those "canyon crawler" bumpers they make for CJ's would be GREAT. Also the type of rocker gaurds that they mak for Yota's would be cool too! I would sure be interested!

Eric :D

[reddog]

<BLOCKQUOTE>quote:</font><HR>Originally posted by Simontrips:
Automatd mechanic to do repairs and mods,why not<HR></BLOCKQUOTE>
That fits in the glovebox!
How about a neon light kit??

Seriously though - I think you could do well with a rack like this one. Looks good, bolts to the factory holes and looks like it could be made/sold for a reasonable price. Shipping would be the only hangup maybe.

http://www.ifsja.org/cgi-bin/ubbcgi/ultimatebb.cgi?ubb=get_topic&f=2&t=000482

Kerry

[ October 05, 2001: Message edited by: reddog ]

[Red78j10]

I would love the clutch cone packs for the QT. That would be so :cool:

[SpruceMoose]

how about an intake system that uses a k/n filter that draws in outside air, and that can be set to modulate temperature (like the oem setup) or use just cold air. i know, just use the oem system. but i was thinking along the lines of a free-flowing system using a cone filter in a shroud, ducted to the outside, and using a low-restriction elbow on top of the carb (or efi throttle body in my case.) i guess i am looking for the elbow to fit on the throttle body, as i could fab the rest.

sm.

[derf]

<BLOCKQUOTE>quote:</font><HR>Originally posted by solar@clnk.com:
Heavy-duty muffler bearings would be nice :D<HR></BLOCKQUOTE>

Don't forget about a larger blinker fluid container. I keep running out. :D

Seriously though, I'd like for ARB to make a bull bar for my waggy. I'd like it to match the one I have on my XJ. smile.gif

[nfroio]

<BLOCKQUOTE>quote:</font><HR>Originally posted by Snakeyes_Tx:
Okay guys...

www.usbody.com (http://www.usbody.com) makes a 3" fiberglass cowl hood, check out the model! She's HAWT!

<HR></BLOCKQUOTE>

The above site only has hoods for Chero's, I want one for a 87 Grand Wag, unless they are interchangeable???? Anyone know????

[WillyPete]

ahhhhh here it is. i've longed for one of these for so long that i forgot about wanting one!

a JEEP CHICK smile.gif

hoods should be interchangeable one wags/cheros i think

[billyj7175]

How about a reasonably priced 4bbl setup that was smog legal...

[Sitting Bull]

Reproduce the factory hidden winch set-up, and you got a winner. I've found 20 people that want one, but never one that exists to get the gameplan and/or measurements from.

[Scott]

Road Armor type bumpers would be awesome.

www.roadarmor.com (http://www.roadarmor.com)

[Snakeyes_Tx]

Nfroio... click on that link... there is no such thing as a 67 Cherokee.. that is the FSJ section and the XJ cherokee one smile.gif

[nfroio]

Snakeeyes,

So, this one would fit onto a 87 Grand Wag?

J-SERIES
68-91 Power Cowl Hood 3" TFCH- 2 $ 549.

68-91 Power Cowl Hood
H/D Features:
- Bolts Directly to the OEM hinge & Latch.
- Hi-Rise design provides and additional
2 ½" clearance - Inner Liner must be cut
open to provide a functional cold air chamber.
- Rear of scoop arrives open.
- 90° edges come long - may need sanded
for a correct fit.

I called them, and the guy that I talked to had no clue what the Grand Wag even was, let alone if that hood would fit....

As they dont really give dimensions, I would hate to toss $550 their way, and come back with something that just dont work no matter which way you slice it, dontchaknow

:confused:

Thanks,

Noah

[Snakeyes_Tx]

See the picture? It's for us.. J-series trucks have the same from the front door to the front bumper in body! Someone here on the list HAS a cowl hood on his J-truck.. and USBody is the only place that makes them! smile.gif

[solar@clnk.com]

Posted By Derf:
"Don't forget about a larger blinker fluid container. I keep running out".

Yes, I had the same problem on a recent trip. The blinker fluid ran low and I put in some 80-octane gasoline...... It made my signal lights ping!!! 100-octane cured that. :D

[Snakeyes_Tx]

Oh! And a something that would automatically rotate the water in the tires would be nice! I'm so tired of doing it by hand!

[derf]

<BLOCKQUOTE>quote:</font><HR>Originally posted by solar@clnk.com:
Posted By Derf:
"Don't forget about a larger blinker fluid container. I keep running out".

Yes, I had the same problem on a recent trip. The blinker fluid ran low and I put in some 80-octane gasoline...... It made my signal lights ping!!! 100-octane cured that. :D<HR></BLOCKQUOTE>

I hear ya but what really got me was when my horn ran out of beep. I couldn't find any DOT approved beep to save my life. And you know how twitchy those AMC horns can be when you don't use DOT approved beep. :D :D :D :D

[Chero77]

I'd most like to see an aftermarket AMC intake manifold designed for use with the Chevy TPI system. I am told that Edelbrock doesn't think there is a market for this.

[nfroio]

snakeyes,

Thanks .. :D :D I knew it looked the same, but alas, I have nothin' but bad, bad :mad: luck when it comes to buyin' stuff, prolly why i got married, someone to think for me...

Well, tonight the wifey is gonna be surprised, honey, need $550 to get a hood that is not functional, just cool looking, OK???

Noah

[tinman]

How about all the replacement interior trim and paneling and exterior trim that you can get your hands on! How about putting all of this stuff together itno a catalouge like people get to fix up their mustangs and comaros! How about just putting the full line of FSJ vehicles back into production... yyeeeee hhhaaaawwww!!! :D

[irbob]

Good topic.

How about some of those soccer mom tail light brush gaurds?

How about some diamond plate, form fitting body guards?

Weather proof door/cargo panels?

Custom fit snorkel kit.

Second the body armor of all types.

And everything above.

[Iron Horse]

OOH, OOh- yeah a *snorkel* kit :D

That would be kool lookin....however I'd be too chicken s**t to use it. smile.gif

[Snakeyes_Tx]

Nfroio... no problem about the hoods functionality. You have to cut open the cowl on the inside of the hood. I would cut a hole for a puller or pusher fan and have it suck in air from the back and blow it down on the motor! My friend did this to his CJ-5. When you're up to speed on the freeway, turn the fan off though.

Also, he can custom make a scoop on the hood of the "Factory" looking one without the cowl. I'd like thim to make me a hood with a 55 T-bird teardrop scoop on it.

Irbob... GREAT idea about the diamond plate body panels. I have been toying with the idea since I made the door panels, and kickplates, to actually mold some panels that cover the rocker and up the first little body line. I think Mark (Above the Law) did this.

[Lindel]

Anything made of unobtainium!!

[solar@clnk.com]

Derf:
I saw some D.O.T. approved Beep for sale on ebay the other day. 55 Gal. drum !

Lindel:
Replacement parts made of unobtainium are just too expensive, even for installation on a Grand Wagoneer! But they sure are shiney!
:D :D

[Unknown Jeep]

A rear bumper with little wheels on it so when I go wheeling I don't drag my Bumper on the ground. LOL

You could make bumpers(real not tube, bumper lift kits(for stock bumpers after a body lift), I could go on and on... Since I am planning most of the stuff you are talking about. ( I am a welder fabricator myself... Among other things...) I am making a Armored aft-Axle fuel tank. Skid plates, bolt on Axle trusses,Ubolt skidplates, Steering box skidplates,ETC ETC ETC. We should talk and I can shoot you Ideas.

Troy
Elf in Tampa ;)

[2j20's]

HOW ABOUT TRUCK ROLLBARS AND A NICER LOOKING BUMPERS AND LITE BARS FOR THE FRONT NOT MUCH IN TO THE KILLER BUMPERS (NOT) PICKING ON ANY BODY.AND A BED COVER ;)

[Joe H.]

How's about a granny 5 speed that works with the QT/NP229? And let's have it for under a grand, and have like a 6.01 to 1 first gear ratio and no freakin' SHIFT LIGHT! I hate those things.

[TPIGUY]

For those requesting a multi-point EFI system, check out www.customefis.com. (http://www.customefis.com.)

TPIGUY

[64Trvlr]

Shift light??????? Whats a shift light?
:cool:

[OBX-AUTOMOTIVE]

LINE LOCK....COOL CAN...HILBORN FUEL INJ......64 YOU GOT ME THINKING....ME!!!!!! :cool:

[jeepgods]

multiport injection for a fsj???????? there IS a god!!!!!!!!!

[derf]

<BLOCKQUOTE>quote:</font><HR>Originally posted by TPIGUY:
For those requesting a multi-point EFI system, check out www.customefis.com. (http://www.customefis.com.)

TPIGUY<HR></BLOCKQUOTE>

I've seen it but it's not emissions legal. Have Edelbrock or Holley or someone make one that has a CARB number and I'd be in heaven. smile.gif

[Rande]

How about a front bumper/brush guard of heavy wall tubing that can double as an on-board air resevior? I suppose if you tweak it, it would just leak though.
How about a front bumper with a winch mount that fits into a receiver so you can move it to the back if you need to?
How about rear frame rollers?
Skid plates?
Rocker reinforcements?
Reinforcements for the lower rear fenders?
Tailpipes that can hold the weight of the vehicle without being crushed?
I made my own fender flares for the 35" tires on my old 72 J-4000 by setting a short section of 8"x8" wood on top of the tire, then wrapping the cable from a come-along around it. Chaining the come-along to a tree and and pulling the fender out. Worked great and nobody not familiar with FSJs noticed it. The tires would rub on tight turns and big bumps but then I didn't have any lift on the truck. The tires were 35-12.50x15 on 8" rims.
I like the idea of the ground effects kit. I would also like a huge wing for the back, some cool blue neon for the underside, a chromed Folger's can for the exhaust tip, some clear taillight lenses, a Ralley style light pod for the center on my hood and suspension hydraulics. Anyone know of a source for 6 bolt, 10" wide, 13" diameter chrome wheels with 8" of offset?

[ January 04, 2002: Message edited by: Rande ]

[Dive 30]

Hey Rande . . . when'd you convert your J from unleaded to rice?

Seriously:

Front Bumper: Winch Mount, Front Reciever, possible brush guard, possible light mounts

Rear Bumper: Tire Carrier, Jerry Can carrier(s), reciever (maybe some flush mount lights would be nice)

Rockers: like Adam said

Skidplates: Tranny, Transfer, diffs, rear mount gas tank

Axle Trusses: Bolt-on would be nice

Brackets: Onboard air with A/C (dual York compressors), dual Optima mounts

Interior: Center console (with rear heat/ac) and place for CB and cup holders. Overhead console (I would like temp, compass, and clinometer). Replacement gauge cluster (template or cover? so that I can buy my own gauges) with tach, speedo, fuel, temp, oil, volts.

Mechanical: Cable shift for the NP229. Hand throttle (tractor rabbit to turtle or cable type). Manual choke.

Fiberglass or Composite (should you be thinking of this business as well): Front/Rear Quarters (rears especially, does ANYONE have a rear quarter that isn't rusting?). Fender Flares.

Dreaming: Roll Cage and/or full tubular chassis (with composite body components). Snorkel. Air locker for AMC 20. Disc Brakes for AMC 20.

Thanks for the survey, keep us posted on what you come up with.

Phil

[ January 05, 2002: Message edited by: Dive 30 ]

[Tad]

These are all great ideas. I think i like Iron Horse's great big fender flares the best so far - and make them for the rear of wagons. :D

[rhamby]

This may not count, but I would like an after-market catalog like LMC for FSJ with nice, sharp drawings of every single bless-ed part of an FSJ in tiny tiny type. Door skins, a nice new primered long bed, spare tire carrier, a new grill that doesn't pinch the crap out of my gut when I lean over the middle seam. A real Jeep radio with the CB. And as above, I'd really like to go to my local AMC dealership, get a free cup of coffee, and try to ask the service dept. lots of how-to questions without paying for service.

[Rogue]

how about vent window seals

[rhamby]

I want an after-market catalog like LMC for FSJ's with sharp little pictures and diagrams like they have and tiny tiny type of every single bless-ed part of every model of FSJ. So I could get door skins, a long bed in primer, a real tailgate, a spare tire carrier, a new grill that doesn't pinch the @#^$! out of my gut when I lean over it, fact. floor mats, Why can't I, huh? I'd also like an AMC dealer where I could go test-drive a 2002 J/10 Golden Eagle. How come they don't put flaming decals of birds on vehicles no more?? &lt;---Yep-need that, too, please. :D This, too!!!! (http://cgi.ebay.com/aw-cgi/eBayISAPI.dll?ViewItem&item=600033440)

[miked]

<BLOCKQUOTE>quote:</font><HR>Originally posted by RogueStar:
how about vent window seals<HR></BLOCKQUOTE>

you can get 'em, but you gotta buy the whole vent window setup with the glass. try specialty jeep, but thier kind of $$$

[Joe J-Truck]

Here's my ultimate please please please make it available and I'll buy it idea:
A fitted soft top kit for cherokee that allows us to cut off the top and make our two-doors into a convertible. Maybe also a kit that would include seals, latches, and weatherstripping to make a removable soft top. Also make a full and functional roll cage kit available. This should attach to the frame and be relatively easy to install.
with the soft top kits have an option with weatherstrips that seal to the door window so you can cut off the window frames on the doors. Kinda like an older blazer when they had the full removable hardtop.
That would be sweet and quite a joy to own and drive a drop-top chero! :D

[Joe J-Truck]

Once you had the soft tops for cherokee perfected, then spin me up one for the j-truck!
Yeah!

[oldyellowwagoneer]

I'd like an electric tailgate window that worked without need of the passengers hand BANGING against it. And.. cup holders that hold the big cups (44ozs & up otherwise whats the point?). 3 gallons of *HOT WHEELS* color changing paint, now that would be cool.
Dennis

[ritepath]

Aluminum body and body panels and Gavalinized frames.

[thejum57]

Chrome rear step bumper, diamond plate running boards, and add on A/C !

[will e]

I would like a second gas tank that doesn't require me to move my spare. (Hey, I like the spare where it is at. When we get out on the trail I take it out and tie it down in the back but MOST of the time it is out of the way!!!!!)

I would like a good after market console. One that makes use of the hump space and the space between the seats.

What do you all think about the rear disk brake setup the guy sells on ebay??? Rear disks would be nice but it is not a priority for me. (Heck I still need to lift the darn thing up a couple of inchs).

I loved the bumper idea that doubles as an air tank. If done right you could have a couple of different tanks so that if you did tweek it you would not lose all of the air.

Would love a front bumper that holds a winch but doesn't stick out too far. I can barely fit the truck in my garage now!

[WillyPete]

a bolt on 4 speed automatic tranny

2.45/1.45/1.00/0.75

:D

[BigStupid]

I,ve always wanted those aluminunummnum corners that they have for those cjs or yjs or whatever they are. I think those things really look nice.Body armor is also a GREAT idea. just my two cents. -bigstupid :D

[BigStupid]

(the other guy)i really like the rocker guards (1"x4") looked into fabbing some for other vehicles but too expensive to risk not fitting right,the hitch winch plate is also a good idea, my bro was talking about the dimond plate corners if no one understood, the fender flares for 35's (would be too small)but still a good thought(but im thinken your adding to b.c.bumpers so it would be metal fab) keep up the good work and keep us posted (bc) skidplates with quick releases for easy access to clean after mudding to aviod rust would be awsome but i think thats a bit much to ask may try to fab it myself. - bigstupid :D

[Bahamut]

Well 500ft/lbs is easy caddilac 500 even comes with a turbo 400 universal mounts are $70 or so thru ??? if ya want to know ask i will look it up again
just swap a tailshaft and you still have your transfercase without moving it or fabricateing anything

45mpg get real(i know we all wish for this one)

[fulsizjeep]

How 'bout replacement QT cones/clutches?

AMEN :cool:

[Cecil14]

Holy thread revival anyone? LOL


aa

[billyrb]

Flint's just longing for the ole' days of yesteryear ;)

[The PIG Smith]

Holy thread revival anyone? LOL


aa
WOW! X2!

Are you trying burn down that barbed wire fence that the telco uses to bring you phone and Internet service?
"I'll get rid of that stinking fence by getting it so hot from digging these old forgotten posts, that it'll burst into flames and burn to the ground!"
http://www.penrodfence.com/Barbed_Wire.jpg

[Gambler68]

I always wonder where all those old members went to.

[krek]

I always wonder where all those old members went to.
Faded away as their rigs rusted away?

[Cecil14]

Agreed, flipping through the first couple pages I note a lot of members I haven't seen in a good long while.


aa

[TAN79]

how about a snorkel?

[PlumCrazy]

Umm did anyone mention lift kits for post-mounted rigs???

Wayne S

[chrisnsarah]

Wow! I started reading the first pages and I thought there was some IFSJA internet reunion that I was in the dark about, until I looked at the dates.

If it hasn't been mentioned yet, I vote for an aftermarket FSJ heavy duty frame, like the CJ's have.

[Cecil14]

Umm did anyone mention lift kits for post-mounted rigs???

Wayne S

Hell's Creek has em I believe...think BJs is working on them as well. Don't quote me on that of course.


aa

[funwheeling]

An spray that will repair rusted quarter panels and fender flares :rolleyes:

Kind'a like hair in the can??:hide:

[Long&Low]

Complete set of body gaskets and window replacement rubber and seals.

A nice Woody paneling set for J-trucks.

Whitewall mud tires, the big 2" or 3" white side walls on an aggressive mud tread pattern.

Replacement front and rear bumpers, the nice older style 3 piece units.

[gojeepin]

how about straight j truck tailgates and headliners for gw's

[Gambler68]

Umm did anyone mention lift kits for post-mounted rigs???

Wayne S

That don't cost more than the purchase price of the rig in the first place? :o

[j20brett]

This is a survey of what is the most wanted part for our FSJ's that either no one makes or there is no selection. Here are some examples.


Skidplates (Transfercase)


I can fix you up with one of these if needed...

[jepj2000]

I vote for a lot of tube trail protection!

- Roll Cages for all models sold as "kits" or in pieces for customization and cut down on shipping.

- High clearance tube winch bumpers front and rear.

- Rock Sliders and maybe a "boatside" kit.

- Tube doors.

- Link suspension kits for the front and rear.

- A kit to convert to 52" Chevy leaf springs in the front. This should also work with the above high clearance front bumpers.

- Tube flatbed kits and tube backhalves for Jtrucks.

I'll add as they come to mind this is just the ideas off the top of my head.

Rankin

[dusty]

a manual crank conversion kit for the tailgate.

a new tailgate system is in order the electronic parts are getting harder to come by and still constantly fail


a knock off of the hidden winch system that hte factory used to offer for the RE series ramsey winches

[Damaged Goods]

Complete set of body gaskets and window replacement rubber and seals.
</p>X2

[Lindel]

A Real, Live AMC/Jeep Dealer, with Real, Live FSJ's.

[The PIG Smith]

I mentioned this over at Bulltear.

An Adapter Ring for the AMC 372 to any other transmission.
Like Gen3 AMC trannys or Small Block Chevy

Other wish items for the AMC 327: Machine a GM HEI dizzy; high performance cams, last, someone to cast a new 4 barrel intake, preferably in AL

[The PIG Smith]

I would enjoy seeing a bolt on Serpentine Belt system for the AMC 360/401 V8

[fulsizjeep]

geez, I can't believe how this took off... :D
I am still about the QT parts and at reasonable prices. :rolleyes:

[Heavy_Metal_Thunder_81]

cooter valves, larger blinker fluid resiviors, heavy duty muffler bearings...that is all...

[Eugene 1]

The Correct Graphics ,Decals, Seatcovers with the correct patterns
cheaper prices on some of the other things.
Bolt in diesel Conversions.

[wickedwagon767]

Looks like a bunch of people are still off track.

- I think a bolt-in interior roll cage kit for Waggys,Chero's and J-trucks would be something MANY guys would jump on

- Or a pre-bent/cut weld-in roll cage kit with varying levels from a simple bar to an 8-point serious cage.

- thick-wall (like .120") prerunner type tube winch bumpers that don't cost a fortune to build or buy

- thick wall sliders

- thick wall tube doors

- transfer case skid plates for guys with the chain-drive 'cases

- axle truss kits (bolt-on and weld-on)

- driveshaft hoops

[smearig]

The Correct Graphics ,Decals, Seatcovers with the correct patterns
cheaper prices on some of the other things.
Bolt in diesel Conversions.

I would love some quality vinyl graphics to put the "Cherokee Chief" text on the doors.

-Stainless steel or plastic high-capacity gas tank
-Complete A/C for $900 like you can get for a CJ7

[pb]

geez, I can't believe how this took off... :D
I am still about the QT parts and at reasonable prices. :rolleyes:

If only we could find someone with NOS QTs to spec out the differential parts for reproduction...:rolleyes: :whistle: :hide:

Maybe set up a ifsja group buy so it was affordable.

[ClarkGriswald]

Ok guys, sold my 79 waggy to my sis last fall. Had to put in a new MTS poly tank but she's driven it all winter and all is good aside from probs associated with drivin such an old vehicle so thats the story on that one..

In the last few days I moved my parts GW(84) around in my yard to a fresh spot, also today fired up the 88 GW and moved it to a better spot where mabye Ill throw a new Y pipe on it or some kinda makeshift exhuast, as I need it to pull tree's/stumps out of a field we are turning back into a hayfield after having had cattle in it (yes the jeep blows the tractor away at this).

Ok the part that does not exist that people desperatly need ???

Brand new frames !!!!!!!!!!!!!!!! oh but for a clean frame would go I !

Im thinking of making some kinda reinforcing plates to sandwich my driverside rear frame before it fails (its rusted with holes thru it but not bent yet amazingly, not for lack of me trying). Thought I could use the 84 frame but its pretty funky too..but not sure on that yet Id hate to scrap the 84 and have no mobile parts storage only to find the frames not good enough. hehe anyway . New frames thats my vote. Im tempted to try and make my own but then I would never use it on the road again (looking like I may not anyway so could be ok).

[COLOFIREMAN]

Kind'a like hair in the can??:hide:

:lol:


How about a an O/D tranny that'll bolt in place of the TH400 with a Q/T??:thumbsup:

Geeez, I feel a little low on the pole with all the heavy posters on this thread.:D

[jaber]

geez, I can't believe how this took off... :D



WOW!!! someone has some time on there hands, LOL

Its nice to look back at where we started and at how most of these items actually became a reality.

I still think a bolt-in diesel would be it, 500 ft/lbs @ 40mpg......Turbo'd of course......

[seriouswood]

:lol:


How about a an O/D tranny that'll bolt in place of the TH400 with a Q/T??:thumbsup:



ditto

[HARDCORE pacer]

a bolt on 4 speed automatic tranny

2.45/1.45/1.00/0.75

:D

The a-500 overdrive off the 4.0 liter is a bolt on 4 speed automatic for the AMC v-8s.

[incommando]

Good topic.

How about some of those soccer mom tail light brush gaurds?

How about some diamond plate, form fitting body guards?

Weather proof door/cargo panels?

Custom fit snorkel kit.

Second the body armor of all types.

And everything above.

You guys have sheet metal left to protect???? I find that the collapsable qualities of the porous, rusted sheet metal aids in absorbing impacts during minor off-road mishaps. :D

Someone claimed to be working with Jeg's for a roll cage kit. That was at least 6-months ago.....

[CHEEP J10]

BEB MOUNTED LIGHT BARS FOR J TRUCK. HOW A HEAVY DUTY NITROGEN ACTUATED GRAPLING HOOK SO WE WE DON'T HAVE TO WALK THROUGH THE MUD WHEN YOUR STUCK. BODY PANELS WOULD BO NICE. AND RESONABLEY PRICED TUBE BUMPER LIKE $200 NOT $499.99.

[dent-techs]

very simple ideas....
-thin sheet metal glove box insert!
-rear spring under frame rail w/shackle flip kit combined with front spring over high steer conversion brackets!
-sheet metal or aluminum 2 piece fan shrouds!
-custom replacement grille
-tailight protectors
-snorkel kit
-full rocker panel rock sliders like poision spider makes for TJ's etc
- heavy duty bolt in seat mounting brackets ( swaping from bench to aftermarket or newer style buckets) you could even incorporate an inner rollcage with mounting points for 5-point harnesses
-over head console for radio or cb
-toneau cover for j-series trucks
-heavy guage metal or diamond plate weld in floor pans!!!!!
-heavy duty rear axle bearing retaining/backing plate ( I've managed to bend both of mine and none of the local parts stores can get the backing plates-I realize bj's sells them with a whole kit but I'd like to see heavy duty maybe 3/16" or 1/4" thick
-rear disc conversion caliper mounting brackets
-coil spring conversion kits
-j-trucks front axle tracbar / panhard
-rear axle anti wrap bar

[srobertsfsj]

An aftermarket 401 crank would be nice :thumbsup:

[Tobynine9]

Custom, pre-cut aluminum diamond plate door/interior panels. My OEM door panels are all nasty and I could make some of my own but if I can keep the time and headache to myself, it would be nice.

OH! And have an option for pre-cut holes for larger than stock speakers. The adapter brackets vendors sell now wouldn't be needed as you could mount the larger speakers directly on the new door skin.

[Tobynine9]

Looks like a bunch of people are still off track.

- I think a bolt-in interior roll cage kit for Waggys,Chero's and J-trucks would be something MANY guys would jump on

- Or a pre-bent/cut weld-in roll cage kit with varying levels from a simple bar to an 8-point serious cage.

- thick-wall (like .120") prerunner type tube winch bumpers that don't cost a fortune to build or buy

- thick wall sliders

- thick wall tube doors

- transfer case skid plates for guys with the chain-drive 'cases

- axle truss kits (bolt-on and weld-on)

- driveshaft hoops


and everything he said.

[hummer010]

Anything for the 327.

[BAYOUDEVIL]

How about a serpentine power pulley system and some of those whinny timing gear set

[skeletor]

other than fiberglass or steel body tubs and reproduction steel fender flares, i think a reproduction of the stock brush guard but out of stronger tube would be cool. and also a reproduction j truck tailgate but made so it doesnt dent up as easy and has have the jeep letters on it.

[BAYOUDEVIL]

OK,I went back and read all the other post and saw what you wanted to know about.How about a hi approach bumpers,or a rear bumper made out of square tubing capped to make it an air tank.

[del]

I started reading at 3 pages, and suddenly there where 7 pages! LOL
I'd like for Chrysler to start using the dimensions of my 401 for a new block design so everything would bolt on, or I could just source that motor and modern everything. Also a good galvanized grill/radiator support would be nice...Del

[daverz]

Don't forget cherokee fender flares & conversion high back seats that bolt up..thanks

[710 Burner]

LOL....and its back. ;)

[lkmarsh]

Since dream season is apparently open, how about fan shrouds, door frame weatherstripping (not pinch weld), and tail gate springs. The down side of having everything made is we would all get lazy, especially those of us who are lousy welders. I like the fact that when I see a built FSJ I know the owner busted his *** to get it that way. "It's what you Build". Junkyard dog I am, for sure.

[joe]

Panel Delivery style barn doors, quality manual tailgate mechanism,

[710 Burner]

... quality manual tailgate mechanism,

Wow, you dream big. :rolleyes:

[ClovisMan]

Drop-in Automatic Tranny with Overdrive that will mate to driver's drop t-case.

[letank]

Even a dual tripmeter, one for gas and one for trip.

QT cones would be cool.

[fishtooter]

I would like to see a dash pad or just the hard overlay that is made for about every other vehicle than a fsj.:banghead:

[maxx71]

How about a plow mount for the newer meyers or boss plows.

Bolt on preferably to fit on a J10

[Dumpy]

This thread is older than my career! LOL How about, a fully functional, never-failing gauge cluster. I'm sure someone's already put that somewhere in here, but I didn't read it all:rolleyes:

[kaklask]

This may not count, but I would like an after-market catalog like LMC for FSJ with nice, sharp drawings of every single bless-ed part of an FSJ in tiny tiny type. Door skins, a nice new primered long bed, spare tire carrier, a new grill that doesn't pinch the crap out of my gut when I lean over the middle seam. A real Jeep radio with the CB. And as above, I'd really like to go to my local AMC dealership, get a free cup of coffee, and try to ask the service dept. lots of how-to questions without paying for service.
I second that!:thumbsup:

[rocklaurence]

A replacement fuel pick up for a J10.

[Rich88]

Bolt on brackets for the front leaf spring eye attachments: Cut the massive rivets off the old ones, remove, and and bolt/weld new ones that are taller. Have them be available in 2, 3 & 4" heights.

[jeepdreamer]

This is the end all-do all item. well 3 items really but no FS jeeper should be without them!
The non factory, dash mounted, winning lottery ticket despencer! The one that matches and goes in the dash between the retro "easy" button and the Flux capacitor!:eek: :thumbsup: :D

[jeepsr4ever]

How about a serpentine power pulley system and some of those whinny timing gear set


We make that one :D


http://www.bulltear.com/catalog/images/serpac1.jpg

[The PIG Smith]

This 'fantasy' aftermarket part that does not exist was an idea that was posted over on Bulltear and I commented on.
Most of what was posted there, I have cut and pasted to this posting to bring more exposure to this idea:

I been thinking about this for a while now. I would love to see someone make a GM TPI Intake for a AMC V-8. There are tons of junkyard FI swaps but the best one has yet to be realized. The old Slomaro TPI units were perfect for Jeeps and trucks but GM never used it in one. They have great throttle responce and low end torque. I think setting a 5.7L Camaro TPI system on a AMC 360 would make one sweet CJ or J truck engine. Everything is avaiable but an intake to bolt the stuff on. :lo1l: If one could make the intake and sell it for under $250.00 it would be a nice alternative to Edelbrocks big $$ Port FI system. IIRC the TPI unit runs out of RPM at 5k but most AMC's do too.

So what ya think AMC guru's?

I really like this idea...but I am guessing the cost would push it into the same area as the Edelbrock turn key offering.

PROS:
1. Use off the shelf components. The only exotic piece would be the intake manifold.
2. Excellent aftermarket support with performance throttle bodies, injectors and plenum runners and Standalone ECM/computers
Picking up some salvage yard units should not be that difficult, but because they are popular with hot rodders, the cost may not be attractive.
3. While the computer tuning would all be based on Chevy 350 specs...a 360 is close in CID and I think the tuning would be a minor issue.
I've learned recently from a fellow fourm member and good friend, that with a MegaSquirt-II ECM and a wide band O2 sensor, the computer more or less tunes itself.
4. Would benefit both Jeepers and AMC Go Fast Car guys.

CONS:
1. The casting of a TPI intake that would fit a GEN3 AMC engine, but accept GM style TPI components would be costly.
I am guessing the only way would be to go to China.
2. Would the GM Legal Department get bent outta shape for someone to product such a part?

http://static.summitracing.com/global/images/prod/large/edl-3860.jpg
Here is a picture of an Edelbrock unit, courteous of Summit Racing.
This unit is for a SBC and costs ~$400
It scares me to think what this same intake would cost for an AMC engine.

[suzq044]

My custom bumper-guard and dash.

To make it simple: make it so I can do two things: print the money I have collected in gran turismo, then print my photoshop ideas into reality..

[dngrs1]

All I want for Christmas, Santa, is that Great Googley MoogleyGreat Googley MoogleyGreat Googley MoogleyGreat Googley Moogley "bakelite" carb spacer for the 4350 on a 4 barrel intake. I had to go to Edelbrock:mad::mad: intake and carb because this part doesn't exsist. :mad:

[Jeepguy77]

All I want for Christmas, Santa, is that Great Googley MoogleyGreat Googley MoogleyGreat Googley MoogleyGreat Googley Moogley "bakelite" carb spacer for the 4350 on a 4 barrel intake. I had to go to Edelbrock:mad::mad: intake and carb because this part doesn't exsist. :mad: it already exists http://www.summitracing.com/parts/TRD-2199/?rtype=10

[ballen0352]

I was doing a seach for information and this popped up and seeing that it never really dies I figured it needed to return to the top:thumbsup: since it was started 9 years ago this month

[John Huebner]

here's a bump back to the top...

How about a nice NOS Burgandy Leather seat cover replacement set...Drivers side please!

[MAPit]

All I want is a motor that has 500 ftlbs of torque @ 2100 rpm and gets 45 mpg. And a squeek free Jeep with A/C.
:cool:
Cummins;)

[MAPit]

Searously though how about a cummins convershion kit? :rolleyes:

[canuck]

Dutch Doors Lets you keep the upper part of the tailgate with fixed glass and converts the lower "tailgate to 2 doors that can be open as an either or ,or both option . See some late model Chevy Astro Van s as an example
Gord

[skwashua]

I would love to see replacement body panels similar to what you can get from LMCTruck.com

[jaber]

I would like to see a set of "pre-runner" fenders like they make for all other trucks...

[Karvin]

Has this thread turned into some kind of Santa's wish list? Looks like it has been going on for 2 years or so.

x2 on affordable front and rear tube bumpers
x2 on replacement doorskins
x2 on roll cage that you can add to as you go
x2 on body armor (tho I kinda see them as rust enablers)

and a new one from me that I didn't see anywhere in the list....


half doors with vinyl removable uppers like they have on the little Jeeps. I kinda like that and don't want to have to cut my door in half to do it.

T-tops for my 77 Cherokee :p Just because I have never seen them before and can't get Smokey and the Bandit outta my head even after 30 or so years.

[jaber]

T-tops for my 77 Cherokee :p Just because I have never seen them before and can't get Smokey and the Bandit outta my head even after 30 or so years.

ROTFLMAO.........:lol:

[Mr.Wagoneer]

A complete OEM Wiring harness for the entire jeep.

[srobertsfsj]

A complete OEM Wiring harness for the entire jeep.

x 1,000,000 :banghead:

[austinaubinoe]

What about a fiberglass or stamped steel replacement for that plastic piece on the late model Grand Wagoneers W/ rear wiper?????

[mdcptman]

Ditto on nice looking, econimical, simple bumpers and side step bars.

[codyyy]

More early stuff would always be nice. Some simple rock rails would be good as well, quarter panel and lower door armor, tail light guards, etc. I am thinking of things that XJs have a lot of stuff for now.
Engine related would definitely be a call to Edelbrock for an aftermarket 4-bbl intake for an AMC 327. And a dipstick tube while I'm at it.

[araknid75]

howabout a clock to fit in the factory hole in the Cherokee chiefs

[Rande]

Wagoneer fender flares without those godawful pockets that the available XJ flares have.

[kiharaikido]

x2 on the rock sliders. I have priced having some made and some made to fit. :eek:

[mdill]

Crack open your wallet, and give Zack a call at ZM Jeeps.

A complete OEM Wiring harness for the entire jeep.