Bulltear AC serpentine kits supports CS144

[jeepsr4ever]

New alternator bracket now supports std 6 5/8 spaced alternator and the CS 144 6 7/8 spaced. Check it


http://i2.photobucket.com/albums/y29/bulltear/asserov2.jpg
For those with Yorks you will be suported shortly! Sorry for the wait!

[ThisGuyUKnow]

New alternator bracket now supports std 6 5/8 spaced alternator and the CS 144 6 7/8 spaced. Check it


http://i2.photobucket.com/albums/y29/bulltear/asserov2.jpg
For those with Yorks you will be suported shortly! Sorry for the wait!

Well ok that bracket looks like the wesdog one. I am getting the one that tightens the belt via the alt. If that one supports a 6 and 5/8s mounting config then it will mount a cs130 no issue. The wesdog bracket may have different mounting distances however because according to your like it will support a cs 144 and when I spoke with bulltear on the phone he was clear that the cs144 would not fit on their bracket. By the way I haven't received the bracket yet and once i get it I will promptly add measurements.

Really fitment isn't the issue here, my whole point of starting this thread is that I can't find any info on how to wire a CS alt into an externally regulated harness. With the later rigs its pretty easy you plug the ech 82 into the alt then plug the old plug that should have plugged into the alt into the ech82 and beef up the charging wire.

[jeepsr4ever]

We quit supporting that alternator