Starter Solenoid help needed!

[billyrb]

Ok, I need more help. I have a solenoid on the driver's fenderwell, and a hodge-podge of wires going to and fro. Here is what I have so far:
http://www.fullsizejeeps.com/jeeps/files/1984-1992-GrandWagoneers/solenoid.JPG
</font> Part A connects to the battery postive post</font> Part B connects to the starter</font> Part E is a ground</font> Part C & D have wires connected to them, but I'm not sure what they are for
</font>Also, some people have talked about "switched power" sources. Are C or D "switched power"? Is this where I hook my DUI Bat. terminal to? If so, does it go to C or D?

Can anyone tell me what C & D are for?

Last but not least, the terminal on the back of the alternator.....that connects to the battery postive cable directly, correct?

[Crazy_Jeepman]

E comes from the N safety switch on the TF727, but it is a ground, D should come from the Key Switch, Hot only when key is in Crank position, C I beleive is powered when Key is on, power supply to ignition. I am not sure thats the way I think it to be. ;)

[ April 03, 2003, 07:24 AM: Message edited by: Crazy_Jeepman ]

[Crazy_Jeepman]

Not sure this helps you but I found this in Painless site.
;) Go Crazy With Wiring!!! (http://www.painlessperformance.com/manuals/90504m/Figure_8_8.jpg)