PDA

View Full Version : air tube bolts

fitron74
12-02-2003, 06:12 AM
Guys,
Anyone know where I can get the air injection manifold bango bolts,without having to be "hosed" by the stealership, that will fit an '87 GW?
Fitron74
Zac
12-02-2003, 06:37 AM
the only other place I could think of would be the junkyard. I would just haggle with the parts man at the dealership.
klank
12-02-2003, 06:52 AM
I found a yard a few cliks away that has a bunch of Banjo's in them but I don't know how long it would take to get them out. If your seriously needing them Let me know and I'll try and round some up for you at the yard.
mdill
12-02-2003, 07:11 AM
From the dealer, they are not to bad, $3.XX comes
to mind for the flat head ones, $12.XX comes
to mind for the one with the stud on the head.

Mike D.
The Anti-Chrysler
12-02-2003, 07:21 AM
What about that www.chryslerparts.net (http://www.chryslerparts.net) ??
mdill
12-02-2003, 08:12 AM
From the dealer, they are not to bad, $3.XX comes
to mind for the flat head ones, $12.XX comes
to mind for the one with the stud on the head.

Mike D.
Joe Guilbeau
12-02-2003, 08:30 AM
Napa sells plugs for about $1.30 each NPT or some other brass thread.
Nobby
12-02-2003, 09:25 AM
Here's some more info for ya

http://www.ifsja.org/ubb/ultimatebb.php?ubb=get_topic;f=3;t=017510#000014
klank
12-03-2003, 08:50 AM
Has fitron74 left the building?
fitron74
12-04-2003, 04:29 AM
klank,
Can you scare me up a decent set of banjo bolts for both manifold? How about the 1/2" tube that goes from air manifold to the cat?
fitron74
klank
12-04-2003, 06:23 AM
klank,
Can you scare me up a decent set of banjo bolts for both manifold? How about the 1/2" tube that goes from air manifold to the cat?
fitron74 Ya, give me some time. I'll see if I can get out there this weekend. I'm dropping Klank off at the mechanics Saturday morning to get fixed and it's two blocks from the yard. I'll try and work it out with my father in law. I'm sure he won't mind going to the yard. He's a junkyard wars kinda guy.

Pm me your address and phone # in case I need to call you.

And I'll look for the tube. I only have one on the 89 but it's going on the 87. Dang emissions!
fitron74
12-05-2003, 06:01 AM
klank,
E-mail me at: fitron74@yahoo.com
klank
12-05-2003, 06:53 AM
klank,
E-mail me at: fitron74@yahoo.com
Ok. Done.