Weld-on Spring Preches (Summit NO-GO)

[Damage, Inc.]

Summit no longer sells these, at least not in their on-line catalog. Does anyone know where else to get them?

TIA...

[BIG BAD JON]

Yeah, I found that too. They have another set...hold on and Ill get ya the part number. They fit the D44's. $12.99. Just bought a pair and they fit!

[River Beast]

https://www.4wd.com/Shop4wd/ProductDetail.asp?ProductSku=98104

[BIG BAD JON]

$12.95. Fit perfectly on D44. Part# DCC-4120074

[nxcj]

I just bought a pair of Mopar perches from Summit on-line a few weeks back. It takes a minute to search for them, but they're there. They're beefy and cheap. I've used them on 60's and 44's....

[River Beast]

http://www.thinkoffroad.com/thinkshop2/asp/product.asp?product=722&ph=search&keywords=spring,perch&recor=21&SearchFor=any&PT_ID=all

[BIG BAD JON]

Originally posted by nxcj:
I just bought a pair of Mopar perches from Summit on-line a few weeks back. It takes a minute to search for them, but they're there. They're beefy and cheap. I've used them on 60's and 44's....Yeah, those are the ones I bought.

[nxcj]

FYI:
If you want the Mopar ones:

Go to Summitracing.com and search for manufacturers part number. Mopar #DCC-4120074
I think you just enter the number, not DCC...

[nxcj]

OK, I'm an idiot....just looked up and saw your other post Jon

[BIG BAD JON]

LOL, dont worry about it... I dont know how many times Ive taken awhile posting and someone else has presented the info I did. redface.gif

[Damage, Inc.]

Sweet...beers on me next...err...whenever we meet!!

[River Beast]

Those are only 3" diameter perches... I need 3 5/8" for the 14FF :mad:

[nxcj]

Actually, they fit loose on a 44 and perfect on a 60. Yeah, my buddy used them on his 14 bolt and relieved them just a bit.

[Elliott]

Rubicon has them 2.5x2.5 x7" "anti wrap" perches with three different holes for axle location on the spring (1" apart).

[River Beast]

Originally posted by Elliott:
Rubicon has them 2.5x2.5 x7" "anti wrap" perches with three different holes for axle location on the spring (1" apart).that's one of the links I posted above

[BIG BAD JON]

Originally posted by nxcj:
Actually, they fit loose on a 44 and perfect on a 60. Yeah, my buddy used them on his 14 bolt and relieved them just a bit.How odd...were there different D44's on the different models of FSJ's? Cause, the ones from Mopar Performance fit just perfectly on my front axle...

Which did you fit it on? Front or rear axle? It fit perfect on my front axle... http://www.nagca.com/forum/images/smiles/1dunno.gif

[nxcj]

Mine didn't touch at the edges of the arc. We're talking...barely. Not a big deal....it's just that the 60 fit more snug.

[biojim]

northern supply has them in the trailer building section. dont have online address. but a store in salem va. (504) phone area code. less then $3.00 each

[Elliott]

The Rubicons are $12 cheaper at my home town store, $33... Olympic 4x4.
I don't have the url but they have a site.