Masonite, ABS or Aluminum diamond plate interior panels for Wagoneers and J Trucks

[men in black]

I can make all interior panels, front, rear doors, cargo, tailgate and kickpanels

Black ABS is 1/8"

All panels $40.00 each
Kickpanels are $20.00 a pair.

Price includes all the holes window, latch, armrest, speaker your choice.
(also can do power window switches and power mirror holes)

Aluminum diamond plate is .045 or 17 gauge thick

All panels are $55.00 each
no kickpanels

Price includes all the holes window, latch, armrest, speaker your choice.
(also can do power window switches and power mirror holes)

If you want powdercoating thats $15.00 extra a panel.
Greg Taylor would do that.

Plus shipping

Panels with power locks/window switch cutout, later model speaker hole.

http://i112.photobucket.com/albums/n192/pixelhound/panels/DSC00792Small.jpg

Power rear window cutout.

http://i112.photobucket.com/albums/n192/pixelhound/panels/DSC00791Small.jpg

Cargo panels with square hole speaker cutout for early models.

http://i112.photobucket.com/albums/n192/pixelhound/panels/DSC00916Small.jpg

Black ABS

http://i112.photobucket.com/albums/n192/pixelhound/panels/DSC02915sm.jpg

Can do gray plastic diamond plate kick panels while supplies last. These are paintable if you use
self etching primer.

http://i112.photobucket.com/albums/n192/pixelhound/panels/DSC03504Small.jpg

Black rubber diamond plate with felt backing

http://i112.photobucket.com/albums/n192/pixelhound/panels/blackrubberkp-1-1.jpg


Black ABS installed

http://i112.photobucket.com/albums/n192/pixelhound/panels/IMG_0881Small.jpg

Aluminum diamond plate

This is the later version with power windows and mirror adjuster switch.

http://i112.photobucket.com/albums/n192/pixelhound/panels/DSC00244Small.jpg


http://i112.photobucket.com/albums/n192/pixelhound/panels/DSC00241Small.jpg

http://i112.photobucket.com/albums/n192/pixelhound/panels/DSC00749.jpg

http://i112.photobucket.com/albums/n192/pixelhound/panels/DSC01033Small.jpg

Pie pan light adapter ring

These are made out of .045 or 17 gauge aluminum diamond plate.
7" outside and 4.5" hole for a light.

1/8" or 1/4" hole for mounting your choice.

Price $30.00 a pair shipped

I can also make them out of 1/8" gray polyethylene diamond plate, black ABS or black foamed PVC


http://i112.photobucket.com/albums/n192/pixelhound/DSC00617Small_zps0ddd80ba.jpg

Aluminum diamond plate with semi gloss black powder coating by Greg Taylor

http://i246.photobucket.com/albums/gg116/amundaza/Eastwood%20HotCoat%20System/Semi-glossBlackDoorPanel.jpg

J Truck three piece headliner replacement panels out of ABS. $95.00

http://i112.photobucket.com/albums/n192/pixelhound/panels/DSC00206Small.jpg


http://i112.photobucket.com/albums/n192/pixelhound/panels/DSC00455Small.jpg

68-72 Commando door panels
$60.00 a pair Aluminum diamond plate (with/without armrest holes)

http://i112.photobucket.com/albums/n192/pixelhound/DSC00608Small_zpsf6738e0f.jpg

Jeepster kickpanels $40.00 pair

http://i112.photobucket.com/albums/n192/pixelhound/panels/DSC00434Small.jpg

[mt pokitz]

Thanks, they just arrived the other day. look real good, just need to get my truck back to install them. will try to get photos loaded soon

[primal]

Thanks for the panels for the doors and kick panels will get some pic's up before and after upholstery is done. My upholstery guy said he could get the snaps and clips for the door panels. Ill let you know if I can get the vendor that supplies these. The panels fit perfect, Thanks again.

[ricbee]

Eric,do you make the rear panels for 2dr cherokees?

[men in black]

Yes, I can make all the panels for a two door.
What material did you want?

[BlueHoncho]

Would you be able to do a pair of door panels for a J-10?

[men in black]

Yes

Send me a PM, I need to know which holes you want

[scram-man]

What would the price be for the side cargo area panels and tailgate panel for a Cherokee?

[men in black]

pm sent

[dakatl]

how much for a set of those front floor mats shipped to 30011 ?



-dAk

[p@55w0rd]

how much for a set of those front floor mats shipped to 44054?

[men in black]

how much for a set of those front floor mats shipped to 30011 ?
PM sent


p@55w0rd your PM box is full

[p@55w0rd]

PM sent


p@55w0rd your PM box is full

PM Box cleared! Also are you making mats for the rear seats? I would be interested in all 4 to 44054.

Chuck

[sallad]

I got my panels a week ago, haven't had the time to get them installed yet but they all look great! I got panels for all 4 doors plus the cargo area. Men in black is a great person to deal with.

[chopsaw]

Just had a couple questions on your interior panels. Is the rubber diamond plate sturdy enough on it's own or will it require additional backing? Are the rear cargo panels for a Grand 1 piece on both sides and do they have speaker holes already cut? Also do you have any pictures of the cargo panels installed? Are you making cargo area mats yet? As you can guess I'm redoing my cargo area and like the looks of the diamond plate.Do you ship these in a flat container or do they get rolled up?

[lifted-04-lj]

PM Me your phone number or give me a call:817 three four three 8666. I'd like to get some new panels. May be a bit before I need them. I'm transplanting a motor right now.

thanks,
Mark

[men in black]

The rubber DP would work on a door or tailgate, but
not as a cargo panel with out backing.

The passenger side cargo panels can be made 1 or 2 piece.
Your choice

With or without speaker holes

Cargo mats yet, No

I have been busy making center console.

[snoopy]

Put my door panels in the other day, now the rest of the truck looks like crap. Thanks its worth every penny. :thumbsup:

[chopsaw]

Thanks for the quick answers. I saw pics of the center console in the other thread. Looks good. Any idea on a time frame for the cargo mats?

[ricbee]

Eric,
Could you make me a set of rearmost cargo panels for my 2 dr cherokee?I want the standard abs,as I plan on re-using the upolstery.Could you bring them to the M&G at Zack's Sat?The right side is 2 piece,with a small bow-tie shaped piece,I will need that part as well.The left side is one piece,they look about the same as the 4-door models.I also want the square speaker cutouts.

[austinaubinoe]

hey if you have installed these panels.... POST SOME PICTURES :)

[bijna]

are you still producing these?

I'd be interested in all the ABS panels for a wagoneer: both front doors, both back doors, , kick plates, and the two cargo panels in the back.

could you tell me how much shipping to 30101 would be?

[men in black]

Pm sent

[rider12693]

i am interested in door panels for a 2 door cherokee, i need both doors and the 2 rear cargo panels, how much shipped to 21015

[wcm321]

Those are very nice! i may be in touch with you soon for some panels for my 79, J10.
Bill M.

[men in black]

rider12693

PM sent

[Great Pharoah]

Eric,
Do you make floor panels? I need a full set as my floor is totally rusted out. Pls send a PM.
Thanks,

[men in black]

Sorry no I don't

There are a few people on the forum that do.

I know ZM jeeps sells them

[1973 wagoneer]

Can you send me some pics of the black daimond plate panels? I am needing them for a J10.




I can make all interior panels, front and rear doors, cargo and tailgate.
Also kickpanels

I can make the panels out of

1/8" black ABS
1/8" hard black rubber diamond plate with a felt backing.


All panels $30.00 a panel
Kickpanels are $20.00 a pair.

price includes all the holes window, latch, armrest, speaker your choice.
(also can do power window switches and power mirror holes)

Plus shipping

Panels with power locks/window switch cutout, later model speaker hole.

http://i112.photobucket.com/albums/n192/pixelhound/panels/DSC00792Small.jpg

Power rear window cutout.

http://i112.photobucket.com/albums/n192/pixelhound/panels/DSC00791Small.jpg

Cargo panels with square hole speaker cutout for early models.

http://i112.photobucket.com/albums/n192/pixelhound/panels/DSC00916Small.jpg

Black ABS

http://i112.photobucket.com/albums/n192/pixelhound/panels/DSC02915sm.jpg

Can do gray plastic diamond plate kick panels while supplies last. These are paintable if you use
self etching primer.

http://i112.photobucket.com/albums/n192/pixelhound/panels/DSC03504Small.jpg

Black ABS installed

http://i112.photobucket.com/albums/n192/pixelhound/panels/IMG_0881Small.jpg

[sallad]

I FINALLY got some time to install my panels today. They look great first of all! I used some stainless sheet metal screws to mount them (3/4" long I do believe) and I did got a little overkill but whatever. I also have the cargo panels but going to have to save that for another day.

Of course some pictures!!

Drivers side front

http://farm2.static.flickr.com/1397/5115080829_2056c85df8_o.jpg

Passenger side front

http://farm2.static.flickr.com/1326/5115679916_20b950b242_o.jpg

Drivers side rear

http://farm2.static.flickr.com/1165/5115680182_7d20ccba8a_o.jpg


http://farm2.static.flickr.com/1334/5115080535_e383f28e6a_o.jpg


Tried to get a close up but meh

http://farm2.static.flickr.com/1336/5115081125_7224c8372a_o.jpg

[Maryland Rick]

These panels look fantastic! My panels on my '87 GW are like everyone elses, molded and flimsy. The underlaying cardboard always gets damp and therefore absorbs moisture, ergo the flimsy panels. Mine even had the vapor barriers still on the doors.

Has anyone used these black ABS plastic panels and wrapped them in the factory vinyl/carpet so they look just like the original panels? Basically...you would be replacing the inside cardboard with these ABS panels and eliminating the molded/warped stock stuff.

Rick

[men in black]

Has anyone used these black ABS plastic panels and wrapped them
in the factory vinyl/carpet so they look just like the original panels?
Well its not original factory vinyl, but Cu4wln used them in his Cherokee build.
There are a few photos on page 23 starting with post 44

http://www.ifsja.org/forums/vb/showthread.php?t=89280&page=23

[cself]

Can I get a price for the four doors and back cargo including tailgate for a 90 GW? 30319. Thanks!

Edit: In the ABS.

[Maryland Rick]

I also want a set of all four doors, cargo area, and tailgate.

Rick
21771

[men in black]

Can I get a price for the four doors and back cargo including tailgate for a 90 GW? 30319.
PM sent

I also want a set of all four doors, cargo area, and tailgate. PM sent

[Suddendeath]

Have you thought about making new backing boards out of the ABS? Those seem to be a hot item around here...

Does anyone make those, now that I think about it??

[men in black]

Have you thought about making new backing boards out of the ABS? Those seem to be a hot item around here...
You can use these, just drill the holes where you need them

Check out the above thread of cu4wln, he used them for that.

[2Tall62]

Would like a set for 4 doors, and cargo area. Diamond plate, manual windows and locks, one piece cargo area, no speaker cutouts. Do you make the kickpanels in diamond plate? Shipping to 68725?

[men in black]

PM sent

[2Tall62]

got my aluminum diamondplate panels last week. All I can say is wow! Excellent craftmanship and Detail! can't wait to get them on. Thanks!:thumbsup:

[EBCIII]

I just installed a set of 4 of these on my Waggy! I would like to thank Men In Black for all his help, and great customer service!! A+ all the way! Beale.

[Mars]

How much for a set of door panels and cargo panels for a 2 door cherk?
Shipping to 45211

[men in black]

PM sent

[sallad]

Just checking in after 6 months with them on my truck, they are still holding up great:thumbsup:

[gtodriver]

Just ordered a set of the ABS door and kick panels. Going to make a huge improvement in my J-3000

[cself]

Just ordered the set for my 90 GW. Planning to line them with sound deadening material to cut down on road noise. Looking forward to this upgrade! :thumbsup:

[zlucky_13z]

I know its a long shot but could you make panels for a '48 Willy's wagon and how much would that cost me? Its not something I can afford to do right now, just looking ahead.

Thanks,
Jarrod

[men in black]

I know its a long shot but could you make panels for a '48 Willy's wagon and how much would that cost me? Its not something I can afford to do right now, just looking ahead.

Thanks,
Jarrod

just need a pattern

pm sen

[ABN82MP]

Any aspirations of making new headliners?

[lifted-04-lj]

I need a headliner as well. ABS would be awesome.

[men in black]

I could make them but shipping would be the problem.

I can roll it up to a 2 foot tube maybe smaller.

[ABN82MP]

I'm interested. Would need shipping to 44691.

[lifted-04-lj]

Any idea about cost.

[men in black]

Not yet

[JP29]

These look great! Could I get kick panels, front and rear doors with power windows/power mirrors with no armrest holes, and rear cargo with the circular speaker holes rather than the rectangle for an 87 Grand Wagoneer ?

Could I get a cost to 55331 ?

Thanks!

[men in black]

JP29 PM sent

[del]

Are you making consoles? If so, do you have pics of one installed?
Thanks...Del

[men in black]

yes PM sent

[trailscape]

What's the cost w/shipping for a pair of ABS panels to 80913?

Thanks. :)

Looking for this:
http://i112.photobucket.com/albums/n192/pixelhound/panels/IMG_0881Small.jpg

[men in black]

PM sent

[kiharaikido]

Looking for this:
http://i112.photobucket.com/albums/n192/pixelhound/panels/IMG_0881Small.jpg

x2 to 28139

[men in black]

x2 to 28139
PM sent

[TugNchug78]

if you start making these, im in! PO tore out eh backing board. :banghead:

[men in black]

Shipping is threw the roof, if you wanted to ship rolled up ABS headliner
$150.00 FedEx

[44BZ]

PM sent

[men in black]

pm sent

[dadd2009]

pm sent

[SNO*MAN]

Need a headliner panel.

[men in black]

Need a headliner panel.

PM sent

[80CHEEF]

just got my tailgate panel in. fits perfectly. very pleased with the craftsmanship. i highly recommend that anyone uses him for panels. will post pics soon

[joker7037]

Price for all electric four doors no speaker cut outs in a GW, aluminum diamond plate. Do the front door panels go all the way up to the lip that is under the window? Shipped to 47201

[SNO*MAN]

PM sent

Did you say this was ready to go?:D

[men in black]

Price for all electric four doors no speaker cut outs in a GW, aluminum diamond plate.
Do the front door panels go all the way up to the lip that is under the window? Shipped to 47201
PM sent, For the electric window switch door panels, yes they do.

Did you say this was ready to go?:D
Sorry there is a delay, My dad has been in the hospital for two weeks.
My wife and I have been driving up to Traverse City,Mi on the weekends.

[Dange]

hey im looking to replace all my 4 of my door panels kickplates and the rear cargo area panels on my 1971 jeep wagoneer.

the only changes i want are no armrests. and a 6.5" speaker hole in the front door panels and 6x9" in the rear cargo panels(if 6x9 is too hard ill just go with 6.5"s in the rear too.. just lemme know and ill order the speakers after i put in my order)
pm me a price for both abs plastic and the diamond plate shipped to 80920 ill let you know

[men in black]

a 6.5" speaker hole in the front door panels and 6x9" in the rear cargo panels
(if 6x9 is too hard ill just go with 6.5"s in the rear too.. just lemme know and ill order
the speakers after i put in my order)


I can do both 6.5" and 6x9 holes, just need to know location

PM sent on shipping

[KLankford]

I am looking for new panels for my 48 Jeepster. Can you make all four panels, front and rear, left and right? Pricing for ABS Plastic.

Thanks

[men in black]

I am looking for new panels for my 48 Jeepster. Can you make all four panels, front and rear, left and right? Pricing for ABS Plastic.

Thanks

Yes I can

Pm sent

[Ristow]

dunno why i just didn't get the full set in the first place.....

http://i453.photobucket.com/albums/qq258/Ristow71/photo-1998.jpg

[Thumper168]

Pm sent

[men in black]

PM sent

[del]

M-I-B, any chance I can get a console? Just redid the interior, and left out the center seat up front. Now I really want to get some cupholders up front. Used the ABS kickplates I got from you last year and they look great. PM me so we can get together....Del

[men in black]

M-I-B, any chance I can get a console?
Yes you can, which version do you want?

Pm me

Here's the latest version, paying homage to the super wagoneer.
I used the door moldings upside down and backwards.
Sand color carpet will be glued to the black ABS.

http://i112.photobucket.com/albums/n192/pixelhound/consoles/DSC00103Small.jpg

[thatguy]

man that's nice! We may have more busines yet to do!

[mdcptman]

how much is that console?

[del]

MIB, sent you a PM....Del

[Comancheap]

Okay, that is just plain cool.

How much for a console please Sir?

Dimensions also if you have them handy

[men in black]

Dimensions also if you have them handy
Here's most of the dimensions, the top has been modify a few times.
There's a inside panel that you can mount USB port and 12 volt power plug on it.
The cup holders are off ebay they're poker table cup holders.

http://i112.photobucket.com/albums/n192/pixelhound/consoles/consolesm.jpg

[82jten]

What would a set of diamond plate door panels for an 82 J 10 cost shipped to 21136?

also not sure if it's stock but my door have 6x9 speakers in the door would you be able to cut that out as well?

[men in black]

PM sent

[Greg Taylor]

Hey guys,
I just did up some diamond tread door panels, made by Men in Black, for another forum member. These are powdercoated in Mirror Black.

http://i246.photobucket.com/albums/gg116/amundaza/Eastwood%20HotCoat%20System/100_3429.jpg

http://i246.photobucket.com/albums/gg116/amundaza/Eastwood%20HotCoat%20System/100_3430.jpg

http://i246.photobucket.com/albums/gg116/amundaza/Eastwood%20HotCoat%20System/100_3432.jpg

http://i246.photobucket.com/albums/gg116/amundaza/Eastwood%20HotCoat%20System/100_3433.jpg

[Great Pharoah]

Are you still doing this this. If so so I'm interested in a Pair of black ABS door panels. Please send pm to me mike@radar-love.org.

[men in black]

Are you still doing this
PM sent to your email.

[Greg Taylor]

Here is a pic of the Mirror Black powdercoated panels installed on another forum member's FSJ.

http://i246.photobucket.com/albums/gg116/amundaza/Eastwood%20HotCoat%20System/InstalledMIBDoorPanels.jpg

[XeroSolution]

I would like a pair of fronts powdered coated in black shipped to 90802.
Do you do the rest of the rear panels as well, send me a second cost on those please, Thanks.

[men in black]

I would like a pair of fronts powdered coated in black shipped to 90802.
Do you do the rest of the rear panels as well, send me a second cost on those please, Thanks.

PM sent

[dirtman]

Looking for a set of aluminum door panels (no window crank hole but all others) and the masonite headliner trim for J-trucks. Shipped to 95128. Can you also do a speaker hole in the door panels for 6-1/2" speakers (5in diamter hole).

[srobertsfsj]

I think you should do headliner backer panels in ABS :thumbsup:

[SNO*MAN]

I think you should do headliner backer panels in ABS :thumbsup:
I second this.....X2 x 100

[Alleneoc]

PM sent

77 cherokee 4dr.

[men in black]

PM sent

77 cherokee 4dr.

PM sent

[men in black]

Looking for a set of aluminum door panels (no window crank hole but all others) and the masonite headliner trim for J-trucks. Shipped to 95128.
Can you also do a speaker hole in the door panels for 6-1/2" speakers (5in diamter hole).
PM sent

[men in black]

I got the aluminum diamond plate today (1/14/12)

So if you need panels let me know

[CMorrow]

M-I-B, sent you a PM. These panels look great!

[men in black]

Email sent

[CMorrow]

Got my panels yesterday.. I am so excited to put these things on! Excellent turnaround & fast shipping from MIB!

For anyone on the fence, just wanted to post my positive experience!

[kiharaikido]

I would concur with CMorrow. While I haven't posted pictures yet, the shipping was prompt and the panels are a great fit. I will post pictures asap.

[bg2pres]

Yes, I can make all the panels for a two door.
What material did you want?


I would like factory similar panels so I can reuse the original Levi/vinyl and rewrap them, as my panels are warped.

79 2dr Cherokee, all panels.

[men in black]

I would like factory similar panels so I can reuse the original Levi/vinyl and rewrap them, as my panels are warped.

PM sent

[SNO*MAN]

Did I miss that you make the diamond ABS panels for newer wagons as well(1989). I need front and back doors in black chrome look?

[Eugene 1]

do you have pics of the headliner installed?:thumbsup:

[men in black]

Did I miss that you make the diamond ABS panels for newer wagons as well(1989). I need front and back doors in black chrome look?


I can make the later versions out of aluminum diamond plate.
Then send them off to Greg taylor for powder coating.


ABS doesn't bake well :D

[SNO*MAN]

I can make the later versions out of aluminum diamond plate.
Then send them off to Greg taylor for powder coating.


ABS doesn't bake well :D

LOL....:D I knew that. How much for the aluminum ones for all four... And for a comparison, if they come black, the ABS ones as a set of four. Do they have the front speaker cutouts? I would need that.

[men in black]

LOL....:D I knew that. How much for the aluminum ones for all four... And for a comparison, if they come black, the ABS ones as a set of four. Do they have the front speaker cutouts? I would need that.


PM sent

Yes on the speaker holes

I have to make the window power switch hole smaller(tighter) in the panels
if you don't cover them, because the switch cover will pull though.

[Eugene 1]

Cherokee door panels in ABS.. also can these be covered in the original material ? pm thanks:thumbsup:

[men in black]

Cherokee door panels in ABS.. also can these be covered in the original material ? pm thanks:thumbsup:

Yes they can

You can either staple or use glue.

I use 3m 90, you can get that a home depot.

[Greg Taylor]

Here is a pic of the panels installed on Tank007's Gladiator door. These were powdercoated in semi-gloss black.

http://i246.photobucket.com/albums/gg116/amundaza/Eastwood%20HotCoat%20System/Semi-glossBlackDoorPanel.jpg

[Jondeaux]

PM Sent.

[men in black]

PM sent

[mrtazwrench]

If I missed it somewhere I'm sorry, do you make anything for the J-truck cab corner area? I'm in the process of making something out of plywood to mount 4x10 speakers there, the plywood does not flex to fit as well as I want it to, the ABS might work well.

[men in black]

do you make anything for the J-truck cab corner area?

I don't make anything for the cab corner, but I make curved boat seats.
So I should be able to make something for you.

Can you send me a pattern or template?

[mrtazwrench]

I ended up making something out of 1/4" plywood, and covered it with a piece of old seat cover. It's flat, but may not be as easy as it looks to make the panel.

[sonoraed]

If you still make it would like a headliner for 79 J10

[men in black]

PM sent

[Ryan-A25]

what all do you make for the a 78 cherokee chief in diamond plate? could you send me some prices?

[men in black]

PM sent

[dirtman]

OK i have a stupid question... just recieved the 3-piece headliner and it looks great. go to install and i understand the piece that goes behind the dome light and the large panel to cover the top, where does the third panel go? I cant find any orientation that makes sense.

66 J-truck

[men in black]

I don't have any good photos, but I'll ask.

[glad64]

m.i.b. how much will a set of abs j truck door panels shipped to 62896 cost ?

[men in black]

m.i.b. how much will a set of abs j truck door panels shipped to 62896 cost ?


PM sent

[RAMBLINFSJ]

I need door panels for my 82 J20. Manual window, door handle, arm rest, and speaker hole. What would the total be for the black ABS Panels to 79407? I'd also like to talk to you about making four interior panels for my '65 Rambler American. They have flat panels too and could expand your market. Let me know please.

[men in black]

I need door panels for my 82 J20. I'd also like to talk to you about making four interior panels for my '65 Rambler American.
They have flat panels too and could expand your market. Let me know please.
PM sent

[mjmolly]

M.I.B.

What would it cost to make a set of front door panels for a 1987 Grand Wagoneer?

[mjmolly]

What would it cost to make a set of front door panels for a 1987 Grand Wagoneer?

[men in black]

ABS or aluminum diamond plate?

Check the very first page and post of this thread for prices and some photos
Here's price plus shipping.


1/8" Black ABS

All panels $40.00 each
Kickpanels are $20.00 a pair.

Price includes all the holes window, latch, armrest, speaker your choice.
(also can do power window switches and power mirror holes)

Aluminum diamond plate is .045 or 17 gauge thick

All panels are $55.00 each
no kickpanels

Price includes all the holes window, latch, armrest, speaker your choice.
(also can do power window switches and power mirror holes)

If you want powdercoating thats $15.00 extra a panel.
Greg Taylor would do that.

[mjmolly]

thanks,

I would like to order the drivers and passenger front panels for my 87 wagoneer with electric windows and mirrors.

What do I need to do next?

[mjmolly]

Sorry forgot ABS panels

[men in black]

MJmolly
PM sent

[budojeepr]

Ready to pull the trigger on panels...

I need front door, rear door, cargo area ABS panels, manual windows, door handles, arm rests, speaker holes (I'll get speakers to fit the holes, yes?). Also need holes for remote (NOT power) mirrors (1981 Limited).

Ship to 96002.

[men in black]

budojeepr
PM sent

[surfwagoneer]

So I've been trying to figure out some way to replace my rear cargo panels with something more durable. Eventually the all the rear cargo carpet will be removed and line-x'ed. This ABS might be exactly what I'm looking for. How do the cargo panels attach? Could they be line-x'd also and still be removable? This would be perfect if it works.

[men in black]

How do the cargo panels attach? Could they be line-x'd also and still be removable? This would be perfect if it works.
You can use push pins, christmas trees, old school Auveco 807 spring clip, or screws to attach the panels

Is line-X like Dyna mat sound deadening? Then yes

Go to the first page of this thread for photos


http://www.auveco.com/images/product/auto/12567N.gif http://www.auveco.com/images/product/xmas/15543.gif

[WasBlue]

Saving my pennies, should be good to go after New Years. I'll request a quote then,. Is it possible to get the late model panels (power windows) with the shorter top like the early Wagoneers had?

[men in black]

Is it possible to get the late model panels (power windows) with the shorter top like the early Wagoneers had?
Yes, Anything is possible

[baseball2525]

Got my panels on after some cutting, very pleased with the result!
http://i122.photobucket.com/albums/o275/zeppelinisworthy/jeep/cd404e84f7f216e30afcb96d15312d35.jpg

[surfwagoneer]

I received my rear diamond plate cargo panels today and black rubber kick panels. Got home late but was to excited so went out in the rain and threw them in the waggy for a little dry fit. There going to look awesome :D I definitely recommend getting yourself a pair. And not to mention great service, quick reply's to any questions I've had and fast shipping. Thanks again! :thumbsup:

[EFelix984]

Hey are you willing to make a headliner for a Waggy? I know shipping would be a pain but if its a reasonable price I may still go for it.

[men in black]

Hey are you willing to make a headliner for a Waggy?
I was but shipping was the killer, but if I made a three piece headliner
that might be shippable.

[El_Diablo]

Are the ABS panels still available? Am I correct in assuming a full vehicle package (cargo, 4 doors & kick panel) would be $280? What would shipping cost to 44691?

Also, just saw you can do the headliner as well. Whats the price on this? Would you be able to ship everything via greyhound?

[men in black]

Are the ABS panels still available? Am I correct in assuming a full vehicle package (cargo, 4 doors & kick panel) would be $280? What would shipping cost to 44691?

Also, just saw you can do the headliner as well. Whats the price on this? Would you be able to ship everything via greyhound?
$160.00 4 doors
$ 80.00 2 cargo
$ 20.00 kickpanels pair
$260.00 total


If you came to the Cabin Fever M/G at ZM jeeps there would be no shipping :thumbsup:

PM sent

I stopped setting up to make wagoneer headliners because of shipping.

[El_Diablo]

$160.00 4 doors
$ 80.00 2 cargo
$ 20.00 kickpanels pair
$260.00 total


If you came to the Cabin Fever M/G at ZM jeeps there would be no shipping :thumbsup:

PM sent

I stopped setting up to make wagoneer headliners because of shipping.
Sounds good... If we can get a date together that works for me and if I can get a sitter I'll probably try and show up. Sadly though, it'll be in one of the cars :o

[Eugene 1]

got mine a week ago and they are great panels!! Thanks Again MIB

[localfiend]

How much for a set of aluminum diamond plate door panels for a 66 gladiator shipped to 99349?

[men in black]

How much for a set of aluminum diamond plate door panels for a 66 gladiator shipped to 99349?

PM sent

[motion vega]

price for aluminum cargo area for 88 waggy with speaker holes. 60135

[men in black]

price for aluminum cargo area for 88 waggy with speaker holes. 60135

PM sent

[high desert hauler]

i have a 79 waggy that i am wanting alum tread plate for all four doors and rear cargo sides but one piece style on passenger side and no speaker cutouts in cargo area. also curious what options there are for speaker cut outs on the doors? will 6 1/2" speakers fit? shipped to nv 89801. thanks:drivin: . gotta burn up the tax return lol.

[men in black]

will 6 1/2" speakers fit?
shipped to nv 89801. thanks:drivin: . gotta burn up the tax return lol.
If you want 6x9" in the front doors there's room

Pm sent

[lkail]

Need all 4 door panels and 2 kick panels for 1991 Wag. PM sent.

[men in black]

PM sent


Need all 4 door panels and 2 kick panels for 1991 Wag. PM sent.

[motion vega]

sent a pm......need diamond plate doors, all 4, with arm rests, power, no speaker holes. 88 wag.

[addicted]

Hey guys/gals. Eric, aka MenInBlack is in the hospital and will be for the next few days or so. He wanted me to let those of you that are waiting for a response or parts to be shipped to know that he will get back with you as soon as he can. I spoke with his wife, and she told me that has a blood clot and is doing fine and should be out soon.

[surfwagoneer]

Best of luck to you Eric and wish you a speedy recovery. Those blood clots are a nasty things.

And ps finally installed my rear diamond plate panels in the wag last week, couldn't be happier. I've already gotten a lot of compliments on them.

[j10jim]

Speedy Recovery!!!

[motion vega]

clots suck

[lkail]

Hey guys/gals. Eric, aka MenInBlack is in the hospital and will be for the next few days or so. He wanted me to let those of you that are waiting for a response or parts to be shipped to know that he will get back with you as soon as he can. I spoke with his wife, and she told me that has a blood clot and is doing fine and should be out soon.
Condolences to Eric and his family. Get well soon.

[Mars]

ACK!!

No hurry on those panels then, just let me know when you're able to get em done and not hurt yourself.

Mike

[Eugene 1]

Get well soon man !:thumbsup:

[men in black]

I'm black up and running

After five days in the hospital and loosing 10lbs because of the terrible food.
The Doctor told me to take it easy for a month and stay away from sharp tools.
Now I'm on blood thinners for four to six months and a 325 aspirin for
the rest of my life.

Thanks to all for the regards :thumbsup:

[EFelix984]

Hey I hope your doing better. Clots suck my father had the same thing.

What the cost on the 3 piece ABS headliner for 1970 Waggy? to include shipping to 93221.

[men in black]

What the cost on the 3 piece ABS headliner for 1970 Waggy? to include shipping to 93221.

As of right now I'm not making headliners. The shipping is outrageous :mad:

[ThaCrabapple]

PM Sent

[men in black]

PM Sent

PM sent

[jeeper330]

Can I get a price on the alluminum for the front doord of an 84 grand waggy and the cargo panels in whatever is cheapest. Shiped to 77328?

[men in black]

Can I get a price on the alluminum for the front doord of an 84 grand waggy and the cargo panels in whatever is cheapest. Shiped to 77328?


PM sent