Taylor Spark Plug Wire Question

[Antelope]

Hi guys,
I bought some Taylor Spiro Wires and there are no instructions on attaching the distributor boot assembly the wire. I looked at how the old wires were and they simply stripped the spark plug wire (leaving the internal wire) and folded the internal wire back against the wire insulation and crimped the terminal around the wire (make sense). Anyway I did one this way and I thought that the spiro wire bent kind of funny and decided to consult with people that have done this before.

[Michael]

Should be the same way. I have Taylor wires on mine. Did it not come with the coil wire or are trying to make it shorter?

[nograin]

Taylor has several lines/models. The ones I have (on my plymouth) came pre-assmbled. That is one of the things I like about it. It had two coil wires, for those running an e-core style coil, etc, and one for regular/old style ends.

[Antelope]

These were Spiro Taylor wires 8.0, the spark plug boot was pre assembled but the boot that goes to the distributor isn't.

[Veepster]

you are fine......that wire has a spiral around it and yes it bends kind of funny.....