scarrry

[68_Gladiator]

take a look at this auction. look at the pic that shows the front suspension, whats wrong?

http://cgi.ebay.com/ebaymotors/Jeep-Gladiator-JEEP-GLADIATOR-1969-/130408885525?cmd=ViewItem&pt=US_Cars_Trucks&hash=item1e5cf9ad15#v4-43

[Knuck]

http://www.huskerpowerhour.com/ubbthreads/images/graemlins/nono.gif on the Front Axle lift blocks.

[68_Gladiator]

even the rear "blocks" look sketchy

[El_Diablo]

apparently the rears are anti-wrap blocks :eek:

[68_Gladiator]

shoot i this is inspiration. i think ill throw a few chunks of 2x4 under my springs :cool:

[chrisnsarah]

Is that really a 4x4 piece of wood under the rear spring.

On the plus side, The Kaiser dash with AMC steering wheel and pedals doesn't look bad.

If the lift is the only fault, it's easily corrected with proper lift springs.

[El_Diablo]

if it wasn't so high priced i would love to have that truck.... just needs suspension work as he said, looks like he might be trying to be somewhat honest

[68_Gladiator]

i want that bed and dash

[chrisnsarah]

i want that bed and dash

Looked at CL lately? Lot of FSJ junk in your neck of the woods. Saw a '63 J200 for $200 and several fairly decent J-trucks.

[68_Gladiator]

dad would be rather upset if i stuck another truck in his driveway. 3 is enough for him. my bed is in almost perfect shape except where it kissed a pole by the PO. i need to find someone willing to let me buy just that section of bed and replace my bent up piece. you can see the scrape here.


http://c1.ac-images.myspacecdn.com/images02/43/l_7d59cba6e6264451b4b0abfdf2859fb8.jpg

[Alleneoc]

dad would be rather upset if i stuck another truck in his driveway. 3 is enough for him. my bed is in almost perfect shape except where it kissed a pole by the PO. i need to find someone willing to let me buy just that section of bed and replace my bent up piece. you can see the scrape here.


http://c1.ac-images.myspacecdn.com/images02/43/l_7d59cba6e6264451b4b0abfdf2859fb8.jpg i WOULD LOVE TO HAVE YOUR WHEELS

[chrisnsarah]

dad would be rather upset if i stuck another truck in his driveway. 3 is enough for him. my bed is in almost perfect shape except where it kissed a pole by the PO. i need to find someone willing to let me buy just that section of bed and replace my bent up piece. you can see the scrape here.


http://c1.ac-images.myspacecdn.com/images02/43/l_7d59cba6e6264451b4b0abfdf2859fb8.jpg
This Gladiator is in my local Pickapart. Got a little dent in it, but looks to be decent. They will let you sawzall the piece out.
http://i175.photobucket.com/albums/w160/schowalterc/junkgladiator.jpg

[68_Gladiator]

i WOULD LOVE TO HAVE YOUR WHEELS

To bad you aren't closer. They are for sale with a set of 33's mounted and balanced for 300

[68_Gladiator]

This Gladiator is in my local Pickapart. Got a little dent in it, but looks to be decent. They will let you sawzall the piece out.
http://i175.photobucket.com/albums/w160/schowalterc/junkgladiator.jpg


to bad you arent closer, that would fit the bill i suspect

[chrisnsarah]

to bad you arent closer, that would fit the bill i suspect

I just realized too it's a shortbed. Don't know if you need all the way to the flare or not. There's an '81 longbed in the yard too.

[68_Gladiator]

no i dont need all the way to the flare i would probably cut the replacement piece at the flare though to give a bit more material to play with

[scottrich411]

its in ellijay, ga...sad thing about it is you could drive that down the highway around here and it wouldnt matter....theres no form of inspections at all...so i guess if it'll move under its own power, its good enough. he does say it needs suspension work....at least he pointed it out