View Full Version : Carb Rebuild kit
3rdelement
04-28-2010, 12:58 PM
What is the best brand and location to purchase a rebuild kit for the 2bl motorcraft carb? does it include the power valve?(the part that you can blow with a backfire)
The Colonel
04-28-2010, 01:06 PM
I know Autozone has the kit for around $25 and it does come with the power valve.
4x4Dad
04-28-2010, 01:11 PM
I and several others have used and liked the quality of the NAPA kit. Costs a bit more than the Autozone one, but still...
3rdelement
04-28-2010, 01:37 PM
just the quality of the gaskets better on the napa one?
3rdelement
04-28-2010, 01:45 PM
does this look like the one from napa youve used?
and what does that power valve look like? can you see if its included based off the pic?
http://www.napaonline.com/Search/Detail.aspx?A=CRB25152_0186026277&An=599001+101985+50038+2038016+504003+504499+30380 18+3999999#
http://partimages.genpt.com/largeimages/502210.jpg
getlost4x4
04-28-2010, 04:00 PM
that's what mine looked like, and it was around $35.
3rdelement
04-28-2010, 04:01 PM
$67 from napa. where did you get yours from?
I have an unopened GP-Sorensen kit from Autozone I can send your way for a reasonable fee. Was thinking I'd rebuild my 2150 and compare the mileage with my currently mounted 4bbl but then I got lazy.
3rdelement
04-28-2010, 04:17 PM
PM me with your reasonable fee :)
eurowag
05-06-2010, 05:29 AM
I uesd the standard hygrade - not sure what the cost would be in the USA but its from America . The exploded view thats posted up in the thread is missing a vital component. The base plate / spacer gasket that goes under the big spacer gasket shown. You would need to order this seperatley before doing your build. I took mine apart and rebuilt last weekend & the plastic part had a bad crack right through it. I recon this was the cause of bad idle/ stumbles and lack of power. It also robbed vacuum from the brakes that work MUCH better now its replaced. The Standard Hygrade kit had that part supplied - but made of tough woven material. I used black gasket sealer on the 2 x baseplates to ensure no vac leaks. It also has a choice of accelerator pump rod lengths.:thumbsup:
OR Bjs also do the plastic insulator plate which you'll need http://www.bjsoffroad.com/CartGenie/prod-425.htm
78J-10
05-06-2010, 08:30 AM
Picked up a rebuild kit for my 2100 last week from napa 16.85. :D
skinnyD
05-06-2010, 02:01 PM
Is there a diference between the 2100 rebuild kit and the 2150 rebuild kit?
Ristow
05-06-2010, 02:14 PM
yes.
vBulletin v3.5.4, Copyright ©2000-2012, Jelsoft Enterprises Ltd.