PDA

View Full Version : Spoiler gromets


Aaron
11-12-2002, 02:04 AM
I thought I read somewhere that NAPA sells the rubber gromets with the nut built into them to go in teh 1/2" or so holes on the roof to mount the rear spoiler. Mine is missing a bunch, so I removed the spoiler and put duct tape over the holes to keep water out. Well I'm doing my headliner in the next couple weeks, and I I want the rear spoiler to be fixed correctly.

Does anyone have the part number for the gromets?

Iron Horse
11-12-2002, 03:06 AM
Go to a GOOD local hardware like ACE or similar....not Home Depot. Ask for "WELL NUTS"....thery're what you're looking for.

Edit: The Dealer may have them.....but be prepare to grab your ankles.......... :(

[ November 12, 2002, 10:07 AM: Message edited by: Iron Horse ]

reddog
11-12-2002, 06:23 AM
As Iron Horse says check your local ACE. Dealer does have them - better bring the KY jelly with ya! :D

Kerry

coolram
11-12-2002, 06:31 AM
If the trips to the hardware store don't pan(no pun intended) out you could also try www.bjsoffroad.com (http://www.bjsoffroad.com) He's a member on here or www.grandwagoneers.com (http://www.grandwagoneers.com) They carry the wellnuts and stainless screws.Not near as expensive as the dealer.

irbob
11-12-2002, 07:09 AM
1/2"x1/4-20 well nuts. Cost me 50 cents each at Suthurlands Hardware Store. Auto Zone and Napa only carried metric ones that were to long. Hope this helps some.