AMC20

[loyd]

I am contemplating putting rear disc on my '81 j10 and was wondering if anyone had pics and/or measurments for the bracket(s) required

Thanks in advance
loyd

[Lindel]

I'm not sure about brackets, but Stainless Steel brakes sells the entire kit for the FSJ!

[loyd]

OUCH!!!! $795 for the dana 44 did not give option for j10 or amc 20

[Lindel]

It shouldn't be that much different, but yes, it's expensive!

[BMB]

Here's a little info that might help.

http://home.off-road.com/~tom85cj7/reardisc.htm

BMB

[loyd]

BMB, Is that brasket that the caliper is mounted on welded to the axel? also do you fill the holes that are not used on the caliper before drilling new ones?

[Don in Missouri]

The Dana 44 and AMC20 brakes will interchange.

When I swapped my AMC20 axle for a Dana 44, I left the original backing plates hanging by bailing wire and bolted them right to the new axle. That way I didn't even have to bleed the brakes.

[BMB]

loyd,
That's not my axle or site. The guys name is Tom. He is pretty helpful when I have contacted him. If you go his home page and click on his name at the top you can e-mail him. I'm pretty sure the bracket is welded on, don't know about the other.

BMB