PDA

View Full Version : help with d44 shaft length


novacayne75
03-19-2010, 11:05 PM
my front axle is a 78 golden eagle j-10 d-44. i need to round up some spare shafts and i lost where i wrote down the lengths of the inner shafts. if someone has the same axle torn down that could measure for me that would be great.

KJ Ryu
03-20-2010, 09:02 AM
Not sure about the passenger side (short) but the driver side (long) is 35.5".

Tad
03-20-2010, 09:14 AM
It's been a long time since I set this up and measured but I am running RockCandy's 79 WT Chero axle shafts in my HD44 from a late 70's J20, as best I recall the 74-79 front shafts for the WT's, J10's and J20's are the same.
Measurments from the spares I carrry (I've had them installed in the same axle also):
Passenger: 16.75"
Driver: 35.375"
(that's measuring from the center of the u-joint to the end of the shafts)

novacayne75
03-20-2010, 08:06 PM
thanks guys im going to try to round some up.