spring hanger

[jeepnut7]

I just found a crack in the left front spring hanger. Does jeep still make these? Does anyone know if theres a stout aftermarket hanger? Thanks in advance

[realbob]

I've got the same problem on my 77. I'd like to know where to get replaceents too

[River Beast]

Front or rear mount of the front spring... just so others and myself will know...not sure if they are different off the top of my head but I don't think so...

------------------
Todd
78 Wagoneer, "River Beast"
360/TH400/QT
Dana 44's locked w/ 4.89's
39.50x15x15 Super Swamper TSL's
7" SOA in front-7" Rear Shackle Inversion Mods
4" Skyjacker Softride
3" Trailmaster Bodylift
My FSJ site: http://www.geocities.com/spazz4life (http://www.geocities.com/spazz4life)
My E-mail: monster_fsj@hotmail.com
"If you can't stop...SMILE as you go under!"

'93 3/4 ton 4x4 Suburban...a.k.a. "FSJ Hauler"

[mhoffor]

I have an 80 chro I can cut the rivits off of and send you the hangers.

------------------
Mike Hoff
74 J10
360 Edelbrock Carb
TH400 w/shift kit
Headman Headers 3" pipes w/flomasters
Spring over front 8" net lift
Shackel flip w/2 1/2 steel blocks rear 7" net lift

[Wagthe78]

If it's front shackles, then MEPCO Jeep can supply OEM with top bushing installed, I think they're between $20-30 each. Don't think there are any upgrades off-the-shelf.

[jeepnut7]

Its the rear of the front spring.
Mhoffor, how much do you want for the hangers?

[River Beast]

Jeepnut,

IF you don't have any luck finding the hangar.. you can make one of 3.5" box steel that's 1/4" thick metal. This is what I used to make my drop-down hangars on the rear of my 78 waggie. Common steel mill should carry this stock in plenty.

The bolt hole should be drilled with a 9/16" bit... FYI

If your curious... go here and look at the inverison kit link... the front hangar of the rear spring. I won't be the same design as you need but may give you ideas.
http://albums.photopoint.com/j/AlbumList?u=1388365

------------------
Todd
78 Wagoneer, "River Beast"
360/TH400/QT
Dana 44's locked w/ 4.89's
39.50x15x15 Super Swamper TSL's
7" SOA in front-7" Rear Shackle Inversion Mods
4" Skyjacker Softride
3" Trailmaster Bodylift
My FSJ site: http://www.geocities.com/spazz4life (http://www.geocities.com/spazz4life)
My E-mail: monster_fsj@hotmail.com
"If you can't stop...SMILE as you go under!"

'93 3/4 ton 4x4 Suburban...a.k.a. "FSJ Hauler"