Power Seat Questions

[Marvin Gates]

I got a set of power bucket seats out of a 90 GW, to put in my 75 Wag, does anyone know how to wire them up or have a wiring diagram that they could scan and email to me? Thanks M.G.
mouse43@earthlink.net

[andy d]

uhhm, if you grabbed enough of the harness. it goes down to 2 wires.on my 83 these were blue and brown.blue is positive, brown is ground.hitch the blue to 12volts you're in business

[Marvin Gates]

Thanks Andy, just wanted to make sure. M.G.

[will e]

Be careful where you hook them up. Those things should draw a fair amount of amps.

One intresting thing about my 81 wag is the factory seats do not work with the ignition in the off position. The electric windows work (except the back). Very weird...

[64Trvlr]

<blockquote>quote:</font><hr>Originally posted by andy d:
uhhm, if you grabbed enough of the harness. it goes down to 2 wires.on my 83 these were blue and brown.blue is positive, brown is ground.hitch the blue to 12volts you're in business<hr></blockquote>

I ran a new wire to my seats. I started with a 35 amp breaker then ran the wire to the seats. Then ground the other wire from the seat motor and you're in business. If you have enough of the harness you don't need to run a new one then make sure you have a breaker or fuse in line.
:cool:

[mccullough_89_GW]

here's diagrams for 88 seats....
88 wiring diagrams (http://showcase.netins.net/web/grandwagoneer/1988_GW_wiring_Diagrams.html)

#5 & 6

kel smile.gif

[Marvin Gates]

thanks guys, I like 64's idea, its pretty much what I had planned but wasn't sure if there was some reason why I couldn't. I didn't get the harness, I was thinking about going back and getting the part I need but I think I'll just make an extra fuse block and then I'll have room for add ons if I do something else later.
Thanks for the diagrams Kel. M.G.