'77 Wag Gas Filler Neck Tubes Source

[DanShaw]

Hello to all,

We have a '77 Wagoneer. The problem is the gas tank filler neck rubber hoses are crumbling. I cant seem to find any source for new parts.
Can anyone help?

Thanks
Dan and Christiana

[JeepFreak]

I'm pretty sure that they are a Dealer only item. Lot's of guys with parts rig's here though so maybe someone might post that they have what you need. Also welcome to the forum.

------------------
JeepFreak

[River Beast]

Get With Veepster... he replaced his about 5 months ago. I found a SUPER HD rubber hose for something else that worked... he couldn't find them either.

BTW the 3 lines are in these sizes for your info:

(1) 1" ID for the inlet
(2) 3/4" ID for the vent and rollover line (that's the one that you see running forward and into the wheel well)

Just thought I'ld let you know...

------------------
Todd
"River Beast" (http://home.earthlink.net/~tjnkk)
http://home.earthlink.net/~riverbeast/rbthnl.jpg
14" of total Lift on 39.5" Swampers
44's locked with 4.89's
...and other stuff...
My Original FSJ site (http://www.geocities.com/spazz4life)
riverbeast@earthlink.net
"When approaching an intersection, remember...
the vehicle with the BIGGEST TIRES has the right of way..."

'93 3/4 ton 4x4 Suburban...a.k.a. "FSJ Hauler"

[JohnnyJ]

I just recently replaced my vent hose, but I could not find any rated for gas line in 3/4
. The person behind the counter said that since it is not under pressure it didn't matter, anybody know if this is the case?



------------------
John Jacobs - jeep_wag_75@yahoo.com
1975 Jeep Wagoneer "Charlie Brown"
2001 Jeep Wrangler
Royal Oak, Michigan
http://members.home.net/jacobsj/index.htm
FSJ FAQ: http://members.home.net/jacobsj/fsj_faq.htm

[Kimbrough]

I had to replace my gas filler tube in my 1974 Wag. NAPA had "FlexHose". Cost $14.00 per foot! Ouch! It was the only thing I could find.
Maybe pull a good one from a junker?

------------------
74 Wagoneer (for sale)
360 v8
TH400 w/low range
dual exhaust
Marvin the Martian floor mats.

'88 Grand Wagoneer
4inch lift
31x10.5 mud tires
http://cwm.ragesofsanity.com/contrib/blackeye/hippy.gif

[DanShaw]

Update to the hose replacement. The local hot rod shop guys suggested going to a muffler shop, pickup pipe to make the bend through the fender and use large fuel grade hose to join all the pieces, eliminating the factory formed rubber hose.
No go at the muffler shop, they cant bend pipe in a 90 deg angle. Still bought some pipe, cut two pieces with a 45 deg and welded them together making my 90. Used the fuel grade hose, its about 1 3/4, will check that.

Also had to re-seal the filler neck to the metal piece mounted to the body, also had gas leaking from there.

I will post a follow up, hopefully this will get rid of the leaks and gas smell in the wag.

[Veepster]

do a search on the hose in the archives...I replaced mine about a year ago........there is an awesome hardware store in town that stocked the stuff.....definitely an industrial item.....don't remember the price(but it wasn't too bad) but I think I posted it a while back......If this is a much needed item I can buy a bunch and ship it out to you guys....let me know...

------------------
Peace.............BartG

the Green Flash!
360ci
Custom 4v TBI
Edelbrock Performer Manifold
TH400, QT with low
4" skyjacker suspension lift, 3" body lift Rancho 9000's
33x12.50 BFG KO's 8" American Racing Baja Rims
Thorley headers, 3" exhaust, Dyno Max
Infiniti power leather seats
Custom billet shift knob by Millerluck
50%Luxury Car, 50%Tractor
http://www.teamgodspeed.com

[80wag.Darryl]

I did mine last year.I got mine from the local price and markle here in Can. I'm sure you can get it at your local industrial supply store,sorry I cant remember the exact size and thickness I got though.Hope that helps some.

------------------
SOA,32x11.50's,3" body lift,Pretty Darn Quick.
"Lead Follow,Or Get The F#%& Out Of The Way" !