Broke a dang ex. manifold bolt

[Mud Thrasher]

I broke a dang bolt off taking those hollow bolts out. It sheared off right at the thread. What's the easiest way to get it out?

[Tourettes]

try using an easyout. prolly wont come out with out several doses of pb plaster or other penatrating liquid.
good luck with it.

[porkchop]

Good thing it is the hollow bolt :D . All you have to do is use and easy out and it will come right out. Been there done that. If you had a solid bolt in there you would have to drill and that can be a pain!

[heydave]

I solved this the easy way. I ordered reman heads. I'll let the rebuilder worry about the broken bolts.
I said I solved this the easy way, Not the cheap way! :D

[nhl77]

Becareful with the easy out. Just went through the same hassle. I broke the easy out and ended up having to pull the head and drill anyway. Not expensive just a PIA :mad: :mad: . Good luck