PDA

View Full Version : Another rollbar question

grand_wag_85
12-23-2009, 11:49 AM
How far up should the factory rollbar sit on an 80's J10? Far enough to cover the stake mount hole? Also, how much of a PITA is it to remove the cover for the filler neck? I see torx bolts on the inside of the bed, are there any hidden ones up underneath?

Last but not least for the center tab up on top, was this for a CB antenna or 3rd light? The hole is smaller so I'm guessing antenna :huh:

Thanks!
tkiller13
12-23-2009, 11:56 AM
Yes it covers the front stake pocket. I would also guess that the middle hole on the tab on the top of the roll bar is for a antenna.
grand_wag_85
12-23-2009, 12:03 PM
Yes it covers the front stake pocket. I would also guess that the middle hole on the tab on the top of the roll bar is for a antenna.

Gotcha. I can't seem to get it that far forward, gonna try to tweak it a bit.