View Full Version : WHERE DO I BUY THIS?
JERSEY JOE
11-17-2009, 03:07 PM
Where can I get replacement parts ( clutches ) for a factory limited slip diff found in a rear dana 60?
shackwrrr
11-17-2009, 03:25 PM
randys ring and pinoin has some kits to rebuild stock LSDs might check there.
http://www.ringpinion.com/
http://www.ringpinion.com/ProductDetails.aspx?ProdID=6384 seem to be the only ones they have for the d60. So if its a powerlock unit you should be good otherwise Im sure a call to them would get you your clutches
JERSEY JOE
11-17-2009, 03:38 PM
DO YOU KNOW WHAT TYPE OF LSD THE FACTORY USED IN SAY 1985?
flatbackdragon
11-17-2009, 06:33 PM
a little searching, came up with an austrailian site for their jeep history, with the CJ-10 (was that the Jeep One Tonner they came out with down there?) w/Dana 60's came standard with Trac-Lok, of course those were built down under. Don't know what the US used.
jeepskater433
11-17-2009, 07:46 PM
wow what a coincidence, Im looking for the clutch parts for the limited slip for the d70 rear for my ram 2500, but I think ive found them
JERSEY JOE
11-17-2009, 08:51 PM
I must say that I was shocked when I took the cover off. I was going to install a LOCK RITE in the case but soon realized that it was a factory clutch LSD. Never saw on on a factory Jeep. I have pulled the entire rear and am going to use another one that had an open diff. In that one I am installing the LOCK RITE. I 'll keep the LSD for my 87 J-20. I am guessing that it needs clutches, not based on anything except it has over 100K on it and it must need a rebuild.
vBulletin v3.5.4, Copyright ©2000-2012, Jelsoft Enterprises Ltd.