So what are you working on?

[jeepsr4ever]

Personally I have a CJ5 project 360, th400, dana 20 and a CJ7 project YJ tub, 232, sr4 , dana 300, scout 44's.

[mrtazwrench]

I cut the last piece of sheetmetal out that I should need for the 87 J20 bed last weekend, been doing some odds and ends on the 82 J20 plow truck, and getting ready to dig into the 360 in the wag that has a tick.

[mrs]

scored a th400 to a 203/ will be building a 203/205 to a th400

[Ristow]

just gettin' this '91 dialed in so i don't have to look under the hood again till spring.

[JERSEY JOE]

WELL THE 85 CJ SITS IN THE GARAGE UNTIL I FINISH MORE PRESSING PROJECTS LIKE THE J-20 REPLACEMENT PLOW TRUCK. IT'S AN 85 WITH 360 AUTO, WILL HAVE 4 INCH SPRING LIFT AND 2 INCH BODY TO CLEAR THE 37'S. GOING TO HAVE TO MODIFY THE PLOW FRAME FOR THE LIFT.

THE 87 J-20 PROJECT IS IN THE BODY SHOP GETTING SOME BLOOPERS FIXED AND WILL HAVE FINAL DETAILING. THEM IT'S SNOWMOBILE SEASON AND WE WILL NOT WORK ON JEEPS TILL SPRING...

[Jeepguyp]

The CJ5 is a back-up driver now that its "done".
Still gotta put a new electric fuel pump on her.

mIGHT ROB A CONVENIENCE STORE OR SOMTHING so I can get this 78 J20 with no engine...

OOps caps lock:rolleyes:

[lkmarsh]

First thing is getting defrost to work. Scrounging parts to convert my Dana 27 to disc brakes. Four barrel intake and Q jet in place of current 2 barrel 2G. Then its on to the back for one-piece axles and discs. Really want to stay five lug. :banghead::banghead::banghead: And wiring. Always rewiring something. Fog lights and tailgate. Anybody completely remove the tailgate switch and miss it?