Help with replacing the tranny mount

[shadowfax101]

I have the 727 and it starting getting some bad vibes in first gear. I also noticed that the park is no locking all the way in.

I looked and I noticed that the main mount. The one in the middle with to bolts is the one that is the main problem. Is this hard to replace? From what I can see, you just jack up the tranny about an inch or two and replace and relower.
Can I get the mount at Autozone or other part house? Also I have noticed that it is not the round ones that most people are talking about. IT is the large one in the middle with two bolts and about 4-5 inches long.

Thanks guys

[Rogue]

sounds like you got it to me, good luck, oops try www.bulkparts.com (http://www.bulkparts.com) for a universal GM style mount, or at least if yours is like mine that's what i used price is way cheap sorry it wont let me link you directly to page, the one i used is listed under GM RWD its like $2.87

[ October 05, 2002, 04:59 PM: Message edited by: RogueStar ]

[dharmabum]

They are easy to replace and you can get them anywhere. There's a few hundred applications that use the same mount so it should be easy to find. The hardest part will be replacing the studs if the new mount doesn't include them but you can use bolts if you have to.

[shadowfax101]

Thanks guys. I am going to have to get one locally because I can not wait for shipment from an internet site. I am sure it will cost more, but time is of the essence.
Could you let me know of some other vehicle that uses it so I could ask for it if they do not have it listed under jeep....

[Rogue]

i would pull it out and take it to the parts store than, i know for a fact napa has nice little pictures in the back of their books, local napa store also wanted $40 for the mount...